Search results for query: *

So I have been trying to chase an issue with my battery not showing it is charging. When I test at the battery with the key off I am at 12.6, running around 12.3/12.4 never appears to be charging. Below is everything I have done and just looking for suggestions. Had Alt tested at local auto...

These are off a 1966 Barracuda and look to have a good amount of life left if turned. They have the reverse threads on the driver side studs. Price: $60 Will ship but buyer responsible for shipping costs from 46142 or can meet up within reasonable distance to Indianapolis IN Payment: Venmo...

Small Block High volume Oil pump with pickup tube. Came out of 340 Price: $60 Will ship but buyer responsible for shipping costs from 46142 or can meet up within reasonable distance to Indianapolis IN Payment: Venmo, Paypal, cash No Holds, Cross Posted, First Come First Serve.

Used 64-66 Barracuda Rear Window Interior Corner Trim Moldings. One has a cracked corner that should not be visible when installed and as most have some wave due to heat over the years. These would be good once repainted. Price: $40 for set Will ship but buyer responsible for shipping costs...

Door Pull, Front and back window cranks with screw. Good condition out of a 1966 Barracuda Door Pulls - $20 for set Front Window Cranks - $20 for set Back Window Cranks - $20 for set Will ship but buyer responsible for shipping costs from 46142 or can meet up within reasonable distance to...

Rubber Transmission mount 1-stud - New Price: $10 Will ship but buyer responsible for shipping costs from 46142 or can meet up within reasonable distance to Indianapolis IN Payment: Venmo, Paypal, cash No Holds, Cross Posted, First Come First Serve.

New Spindle and Lower control arm ball joint with new bushings. I bought a kit for front end suspension and also a new disc brake conversion so have extra set. Price: $65 Will ship but buyer responsible for shipping costs from 46142 or can meet up within reasonable distance to Indianapolis...

Rear shackle hangers off a 1966 Barracuda, blasted and powder coated ready for installation. Price: $40 Will ship but buyer responsible for shipping costs from 46142 or can meet up within reasonable distance to Indianapolis IN Payment: Venmo, Paypal, cash No Holds, Cross Posted, First Come...

New in box DEI Starter heat wrap. Bought 2 by mistake and could not return. Part number: 010402, size 7x24 can be cut down to fit your application Price: $15 Will ship but buyer responsible for shipping costs from 46142 or can meet up within reasonable distance to Indianapolis IN Payment...

I have a set of New PST Torsion Bars (TOR4820) for sale. I bought these and could not get them to work with the new headers I installed so went back stock size. These are 1.03 and they were installed and removed but never had the full load of the car on them. Wish I could have used them but...

Looking for passenger side rear window regulator for 1966 barracuda.. mine has a few broken teeth so won't fully roll up without pulling on the window.

Small Ball joint Upper Control Arms with new Bushings and Ball joint. Blasted and Powder coated black. I changed to large ball joint from QA1 only reason for not using these. Price: $160 Will ship but buyer responsible for shipping costs from 46142 or can meet up within reasonable distance...

1964-66 Dodge, Plymouth A/B Body Black Rear Arm Pads with Ash Try cut out. New in packaging Part number MF1754 Price: $45 Will ship but buyer responsible for shipping costs from 46142 or can meet up within reasonable distance to Indianapolis IN Payment: Venmo, Paypal, cash

1964/65/66 Barracuda Black Headliner from legendary p/n: HL65CB101F Price: $90 Will ship but buyer responsible for shipping costs from 46142 or can meet up within reasonable distance to Indianapolis IN Payment: Venmo, Paypal, cash

Small Block Aluminum Water Pump. New but I did install then realized it would not work for my application so removed (never ran with it installed). Price: $45 Will ship but buyer responsible for shipping costs from 46142 or can meet up within reasonable distance to Indianapolis IN Payment...

Starter for Small Block 273/318/340/360 - this was in a 340 and worked without issue. Replaced due to needing a high torque without a nose cone to fit without having to remove headers. Will ship but buyer responsible for shipping costs or can meet up within reasonable distance to Indianapolis...

I have a 7 1/4 Rear End out of a 1966 Barracuda with small bolt pattern and driver side is reverse threaded, Open Diff, I am good with giving away if anyone has a need for one. Worked great during the 2 years I drove the car but changed to 8 3/4 this year. Just have to pick up, South Side of...

Engine Oil Filter Relocation Kit - 15748 Opened and mocked up on engine but went another direction due to header location. Price: $40 Will ship but buyer responsible for shipping costs or can meet up within reasonable distance to Indianapolis IN Payment: Venmo, Paypal, cash No Holds...

456 Richmond Gears Mopar 8 3/4 742 Case. Price: $85 Payment: Venmo, Paypal, cash Will ship but buyer responsible for shipping costs or can meet up within reasonable distance to Indianapolis IN

Lakewood Scatter Shield for Mopar 318/340/360 4 speed car. No Damage or modifications. Will ship but buyer responsible for shipping costs or can meet up within reasonable distance to Indianapolis IN Price: $275 Payment: Venmo, Paypal, cash

Holley 800CFM Double Pumper Carburetor List No 4780-2. Good working condition when removed from car in the fall of 2022. Buyer responsible for shipping costs Price: $150 Payment Methods Accepted: Venmo, Paypal, Cash

A833 4 speed 23 spline Transmission from with T/A Road Race Gear set. This was originally from a 71-74 E-Body but fit an A Body. This has less than 500 miles since rebuild in 2020 and was connected up to a 340 engine in a 65 Barracuda. Not able to Ship but will be willing to meet within a...

Small Block LA Motor Replica/Mockup Engine for sale for 318/340/360 engine. Used to verify headers would work on my 1966 Barracuda (They Did!!!). Has threaded bolt holes for all accessories and mockup Heads. Would be great for custom application or just verifying space with headers ;-)...

Hey everyone, I am trying to find either new or used Heater/Defrost Cables for my 66 barracuda. I have one that broke and figured the others are not far behind. Any suggestions on where to find or who might have a set for sale? Thanks as always for the help

I have an A833 I took out of a 65 barracuda that the guy was setting up for street/strip use. Was told it had racing gears. I don't have a need for it but wanted to find out how I can tell what the gearing is before posting it for sale. I did drive it before removing it and it ran well.

Looking for recommendations for a transmission rebuild in the central Indiana area. I have a 904 connected to an existing 273 but will be swapping it out with a 340 with the below build. 1970 340 10.5 pistons 557 lift 292 duration solid lifters .208 intake 1.4 exhaust valves Triple valve...

I have a question about finding someone local that can help swap out gears in a rear end I have. It is fully removed and currently has a set of 4.56 gears and want to change to a set of 3.73. It is a 742 case. I am in Central Indiana and looking for a shop that could handle this swap. Also...

I have a 1965 Barracuda for sale in central Indiana (46142). Previous owner was setting up the car for racing but could be restored for driver as well. No engine or Transmission but do have 1 3/4" Fenderwell headers, 3" exhaust with flowmasters. Tires are new SBP rear are 245/60/r14, front...

I suspect this has been asked before but I am looking to install the spring relocation kit from USCT (Mopar A-Body 67-75 Spring Hanger Re-Location Kit) for my 66 Barracuda... I will be swapping to a 8 3/4 rear end and wondered after these changes what size tire could I fit... would prefer a...