Search results for query: *

I'm selling a set of 360 1.88 J heads. These have been cleaned and crack checked. They have 3/8" thick wall bronze guides in good shape, they have been touched up in the ports and the combustion chamber, has been polished. I got these this way but they look like good start cores as they did very...

I have 3 sets of Mopar Performance 360 main cap sets for sale. These are nodular iron MP parts and are sometimes machined and used in 2 bolt 360 blocks to beef up the bottom end a bit. The first 2 sets have 2,3,4 and 5 caps. The third set has a heavy 4 bolt for the 3 thrust bearing but the 2,4...

I'm working on a build and want to use a 3.6" crank and I see that some builds use a 426 Hemi 3.6" crank. Does anyone have a good used one they are ready to sell? Thanks guys!

I have a set of Direct Connection valve covers for an LA engine. They have baffles, grommets in plastic still and the breather, all new and perfect. Packaging should tell more than I can. 150 obo plus shipping. Item is in Des Moines, Iowa 50316

I'm looking for someone in the Milwaukee area that is willing to pick up an intake in West allis and ship it to me in Des Moines Iowa. Send me a message if you can help. Thanks everyone, Have a Merry Christmas everyone!!!

I have a very good Mopar 3x2 manifold for a small block. Asking 1200 obo plus shipping from 50316. Item is in Des Moines, Iowa

I'm selling a new never unsealed Molnar 3.79" 360 crankshaft I bought new from Tom a couple months ago. 800.00 plus the ride. Also Mopar Sb 3x2 intake manifold for 1200 obo. plus the ride. Parts in Des Moines, 50316 Send a message.

I ran into a deal on a 340 manifold and carbs. The center carb is a replacement with no serial numbers. The outboard carbs are 1970 4382 and 4383 serial numbers. They need cleaned up, a few pieces and rebuilt. I'm just wondering if they are better off with someone restoring a six pack car or if...

Selling a set of J heads. I picked these up with a bunch of things this summer. Had them cleaned and magged good. They have thick wall bronze 3/8" guides that checked out good. polished chambers and a light port job. They had 1.88 valves when I picked them up. They do not have hardened seats...

I have 2 sets of Mopar Performance main cap sets for sale. The first set has 2,3,4 and 5 caps. The second set has a heavy 4 bolt for the 3 thrust bearing but the 2,4 and 5 caps are all 5 caps. Someone bought several sets and used a couple of the heavy caps for their front cap I assume. They...

I have a power steering pump with bracket. I pulled this from a 1966 Chrysler New Yorker wagon 440 30 years ago. It's been in my shop. I may still have the cooler, but cannot find it at the moment. 125 obo. plus shipping. It appears to be in good shape. Ships from Des Moines, Iowa 50316 I...

Selling a New Sbm Milodon windage tray and new ARP main bolt kit to match. 80 dollars each shipped or 150 shipped for both in lower 48.

Can anyone tell me if SBM 915 J heads can be used with a Hyd roller cam? What if anything needs done to make this work? Is there an issue with the push rod hole? Thanks.

I just put a new Borgeson box in my car and am selling the original box to anyone looking for a rebuild core. The box has a little play and leaks. I will ship direct to Firm feel if the buyer pays the shipping. 30.00 OBO plus shipping. The Item is in Des Moines, Iowa 50316 The big one in the...

Hey Guys, gals, I'm about to pull my rear glass on my 67 fastback. Having it done by a professional. When I get it out and clean will these clip screws self tap or will I have to predrill holes? Any advise on this would be great. Also. I read that the headliner on a 67 Barracuda requires the...

New Mod Man SB La style intake manifold. This was bought new and stored away. It has the 2x4 carb top plate. 525 OBO plus shipping from 50316 Item is in Des Moines Iowa.

I'm selling a used M/P forged steel 360 Main 3.58" std, std, internal balance crankshaft I bought on here. I'm buying a 3.79" only reason for selling. Previous owner said it was magged good. It looks great. 500.00 plus shipping OBO. Item is in Des Moines, Iowa 50316

New, installed and never used. I'm selling a forged steel 8.75" 10 spline yoke for a 7290 u-joint. These were used in trucks and 4 speed cars. 75 shipped Obo.

I picked up a set of these then went with a roller cam. These are new only a couple months old. They are the AMC style and can oil through the pushrod. These have the super lube grove option. 180 shipped or best offer.

I installed a Borgenson steering box kit from this sites vender. Everything was great and installed easily. I used my original 1967 273 power steering pump. The steering feels a little stiff untill the engine reaches 12 to 1400 rpm. Does this power steering box work better with more pressure...

I have a new std volume SB Melling oil pump in the box with gasket and instructions. 50 shipped. Item is in Des Moines, Iowa.

Selling a new never used Milodon oil pan and the matching new pick up tube. The oil pan fits a 360 is 4 qt and has the oil baffles in it. 200 plus shipping. Item is in Des Moines, Iowa

Selling a new in the box set of Sbm connecting rods. These are 435 new at Summit. asking $300 shipped in a usps large box. If I can't get them to you in that box buyer pays the difference in shipping. You can see the part number to go to summit or? to get exact details. Part number PCE274.1047.

Selling the power steering column from my car. It is a 67 Barracuda column shift automatic column. I was using this daily until last week when I installed a floor shift steering column I bought from a guy on here. The left turn signal cancel does NOT work and the reverse light switch is bad and...

I'm selling a nice set of 273 rocker arms. I got these with 3 other sets, They are bannana grove with 2 oil holes per rocker. They were the best set and I planned on using them. I picked up a set of roller rockers and no longer need these. 200 obo. Buyer pays shipping. Item is in Des Moines...

I'm selling a new set of Richmond gears. I bought these to use and ended up going with a 29 spline Dr Diff set and yoke. These are 3.55 ratio, 489 case 8.75" tapered pinion gears. 175 plus shipping. Gears are in Des Moines, Iowa 50316.

I just put a new Borgeson box in my car and am selling this to anyone looking for a rebuild core. The box has a little play and leaks. I will ship direct to Firm feel if the buyer pays the shipping. 50.00 plus shipping. The Item is in Des Moines, Iowa 50316 The big one in the picture is the...

I am restoring a manual steering column for my barracuda. under the turn signal plate are 2 screws that appear to go to 2 square nuts under the first plate. But they do not appear to hold anything together. And upon reassemble the first collar has a little play. Can anyone tell me what, if I'm...

Selling a freshly cleaned sb Performer manifold with egr option. 200 obo plus shipping. Item is in Des Moines Iowa. 50316

I'm selling my new cam. I bought a roller cam block and don't need this. It is new never out of the box and bought this spring. 150 obo plus shipping. Item is in Des Moines, Iowa 50316