Search results for query: *

I need one

The picture is the back of dash that I have behind fuel gauge.

I thought I had found the right Ivr and had it saved but must have deleted it. The ones I see now plug into the back of the dash near the fuel gauge but I have no where to plug it in.

I see the part, but I don’t have the slots that it goes into thanks. When Ilooked it up it is this

I have a 66 barracuda my fuel and temperature gauges are not working. I had found on this site a picture and part 5 volt resistor and can’t seem to find it again,now that I removed the dash panel. I don’t know what happened I had it saved and now can’t find it anywhere.

Checked resistor all good there.

Thanks going to look into that

Has anyone removed the a/c fan switch on a66 barracuda? My fan won’t operate from the switch but a 12 volt wire to the fan works. Trying to figure out if I have to remove dash or can I get to it just through the heater control.

How are you? Still never figured out my blower motor switch problem. Did you ever get yours working?

I think that’s the issue of the housings being grounded to the fenders. Would love to get them working.

I do have one other issu I haven’t figured out. The turn signal lights on the top of fenders I haven’t been able to get working. Changed the bulbs a while back and nothing doing? Im not an electrical guy but I think it is a grounding problem with them.

Thanks appreciate your input. I think I figured it out. The brake lights were on because the peddle had too much play in it so that’s why the lights were on and I’m pretty sure the horn relay was bad. Checked the wires and they are all good. I was frustrated and thinking the worst.

Please explain? What harnesses? All the wires are there, trying to figure out which color wires do what and see if I can just move them around in connector so they match up. Everything did work before just seems the two connectors have wires in different places in connector.

I was so hoping this was just going to plug in and everything would work.

I have a 66 barracuda and just changed from column shift to floor shift. I got a column from a valiant and installed it. When I plugged in the wire connector nothing works Horn,blinkers etc and when plugged in the tail lights are on when shouldn’t be. Trying to figure out if I can take apart...

Somehow today it went together. Actually after several attempts yesterday and today it slid right on. Very tight quarters but it worked. The wires not so much, plugged it in and no horn and rear lights on when they shouldn’t be. Play with that another time. When I get a chance I’ll send a...

I don’t understand what you mean by move the box to the center? with the wheels straight, the masterspline is at 12 o’clock on the st box. With the mark on the coupling lined up the steering wheel is 90 degrees off. I think I will take the coupling off the column I removed and see if it will go...

Pics I got to line up with master spline

It definitely can only go on one way? It won’t go on if it is not lined up with master spline and marks or hole on shaft?

I have the master spline at 12 o’clock, but if I line up the steering shaft with the mark or the hole in the shaft with it the steering wheel is about 90 degrees out? I don’t think this column was ever apart. The wheels are straight with master spline at 12 I don’t understand why steering...

I haven’t got to trying to install yet, but if I line it up seems like steering wheel will be off like 90 degrees? Probably get into it a little later when it’s a little warmer.

Thank, I will look and see if I can find that. I really appreciate your help, hopefully Ill get it back toge soon.

Do you see anything Im not seeing?

The couplings and splines look pretty much the same to me and the diameter measurements are same as far as I can tell.

Another picture

Looks like they are very close to same length

I’m thinking that could be the problem. Car has power steering not sure if this column was in power steering car. I have the other coupling that was on the power steering bo, looked the same will have to look in it further.

Thanks going to check it out in a little while. Is there a similar spot on steering coupling spline? I didn’t see one going to check it out again.

Is master spline the blank spline on steering box shaft.