Search results for query: *

I have a friend in the SF Bay Area who has 2 1971 Plymouth B-bodies, one Roadrunner and one Satellite. The runner was an original 383/727/8-3/4 car which had started 'race car' transition several years ago, but the owner had a terrible accident that almost claimed his life, so the project got...

New, in-the-box valve springs...$100 plus shipping from the Savannah, Tn area. PM me here if intereted, thanks...wb

New, in the package, 7* 1.400/1.969/.690...$70 shipped in the lower 48 USA. PM me here if interested, thanks...wb

OOPS, having a problem enlarging it, be patient folks, I'll get it.

> Old > Butch > John was in the fertilized egg > business. > He > had several hundred young layers (hens), called > 'pullets,' > and ten > roosters to fertilize the eggs. > He kept records, and any rooster not > performing > went into the soup pot and was replaced. > This took > a lot of...

A blonde calls her boyfriend and says, "Please come over here and help me. I have a killer jigsaw puzzle, and I can't figure out how to get started." Her boyfriend asks, "What is it supposed to be when it's finished?" The blonde says, "According to the picture on the box, it's a rooster." Her...

Misc carburetors, see the pictures for condition and base stamping numbers, and enquire as required. Located in the Savannah, Tn area, pm me here for more info and shipping costs. Thanks for viewing... Note...the one 4640 is missing some parts while all others are good rebuildable cores. I...

I have 4 American 'mags' that were on a project Belvedere I recently bought. I'm not sure of the size as I'll remove one tomorrow and check the wheel and tire brand, but they're either 7x17 or 8x17 wheels with 245-45-17 radial tires. These have zero miles on them as the car's not a...

Decent set of swing pedals for '67-later A-body. I don't recall the year but they're decent and complete...$275 plus shipping from the Savannah, Tn area or trade for a set for '66/7 B-body. PM me here if interested and thanks for viewing...wb Note...the 'rust isn't as bad as it looks as it's...

New set of black front or back arm rests w/o ash trays, still sealed in the bags...$75 plus shipping from the Savannah, Tn area. I also have a new set of rear panels for a htp b'cuda in black with wood graing inserts...$175 plus shipping. PM me here if interested and thanks for viewing...wb

Looking for a very nice pair of 625 cfm Carter AFB carburetors. MUST be clean and very nice condition and without damage/modifcations. If you have something as described, please pm me here, thanks...wb

One new set of Comp Cams 10* chromoly steel retainers 740-16 in the package, $85 shipped in the lower 48 states. One new set of Comp Cams 641-16 3/8"-7* single groove valve locks, $35 shipped in the lower 48 One new set of Comp Cams 612-16 3/8"-10* single groove valve locks, $35 shipped in the...

I have a friend that has a 1971 340 he'd like to sell so here's the scoop on his 340. If you need, contact me here and I'll forward his contact info to you, then. Thanks, much appreciate...wb 1971 Mopar 340 Engine . Run's, will need to be gone through . Block casting number # 2780930 -340-5 ...

Looking for a nice pair of Carter 9625/9626 or 9635/9636 Carter AFB carburetors. No corrosion or nasty carbs, must be decent with no damage or broken parts. If the plating on the linkage pieces is good, that's a big plus but rusty linkage is unacceptable, they must be void of all rust/corrosion...

A very nice pair of 9755S 750 Carter AFB carburetors, bought for my 426H project but not used. These are clean and used but in very nice condition, $450 plus shipping from Savannah, Tn. PM me here if interested, thanks...

This set has been on the shelf for quite a few years...one complete set of 440 Source 383 stroker pistons, 4.274" (+.030"), 1.32" compression height, .990" pins, flat tops with valve reliefs (for approx .700" lift camshaft), made from 2618 T-6 forged aircraft grade aluminum, lands cut for 1/16"...

I have 2 new pairs of Schoenfeld slip-on 3-1/2"x16" collectors for 1-7/8" primary headers. They'll need the tabs welded on when you align them with your primary tubes. $225 plus shipping for both sets, from Savannah, Tn 38372. PM me here if you have an interest and thanks for viewing, much...

New Comp Cams 986-16 dual valve springs with 744-16 retainers. Will work on LA small block chrysler or SL6 engines, $150 plus shipping from Savannah, Tn. PM me here if interested and thanks for viewing this ad...wb

Nice Moroso B/RB chrome valve covers, very nice, no rust or damage, $95 pr Used steel 833 shift forks, $125 pr New steel 833 shift forks $175 pr Fresh 8" A-1 converter with out-of-cert 6 bolt flex plate and bolts, $500 New center sump B/RB oil pan, $120 Chassis Engineering ladder bars with new...

Looking for a set of PEP 6.76 I-beam connecting rods with std 2.5 Chrysler journal bore and .990" pin bushings. PM me if you have something, thanks...wb

A pair of new Smittybilt black bucket seats, similar to the A100 van seats so many SS cars were equipped with, nice looking, need mounting brackets (make them or buy them), $225 plus shipping from Savannah, Tn 38372. Contact me here if you have an interest. Thanks for viewing...wb

1965 Valiant V100, good solid core project car. Looking for a new or excellent Quicktime RM 6078 or 6073 B/RB bellhousing (NO LAKEWOODS please), 15x10 Cragar Super Trick wheels, excellent condition satin finish w/4.5" rear spacing, New Wilwood race disc brakes for B-body, good...

One pretty nice/low usage 850 Mighty Demon annular discharge carburetor. The older BG units that were very nice with all the adjustable bleeds, etc. I bought this 8-10 yrs ago from a fella that had attempted to use it on a 427 BBC street car that was pretty much a stock L88. He claimed it didn't...

1971 Plymouth for sale. Original Satellite Sebring Plus 383 car, cloned to compete in NHRA Stock Eliminator as a GTX, 440, 4 spd, 8-3/4, now set-up as a street car and should handle like a dream. The engine has all race-grade machine work, 906 heads (2.08/1.74 stainless valves, new exhaust hard...

I'm looking for very good condition satin finish only, 15x10 with 4-1/2" backspace. Please, no Centerlines, Super Tricks only. If you have something PM me here, thanks...wb

Looking for a QUICKTIME RM-6078 or 6073 bellhousing for a B/RB/426H, can be used but undamaged and no modifications. PM me here if you have something, thanks!

Looking to purchase an Edelbrock 383 6 pk intake manifolds (P4529055), nothing hacked or modified. PM me here if you have something I might be interested in, thanks!

Looking for a Quicktime bellhousing (rm-6073/6078) for big block Chrysler (383-440-426H) engines, for 130T flywheel and chrysler starters, new or used. PLEASE, pm me here, thanks!

Looking for 4.350-4.380 x .017-.020" shim head gaskets for the B-engine family. NOT the larger 4.440" bore but the smaller bore shim gaskets (361-383-426W). If you have any of the P4286754 sets, that's better. PM me here if you have something, thanks...wb