Search results for query: *

Located in Oklahoma City 1974 Plymouth Duster 360, 727 automatic, 8 3/4 rear, 3 inch exhaust, headers (flat in the normal places), small starter, and tach. New upper/lower ball joints, bushings, tie rod ends, idler arm, B&M Quick silver shifter and BF Goodrich tires. Front disc brakes. Optima...

By using the search feature on FABO I have received some very good advice from the folks who take their time to share their knowledge. For the past two weeks I have chased a suspected fuel, timing, or electrical problem.:banghead: During the search I have been forced to address other problems...

[email protected] I saw this and took a trip to see it. It is a /6 with A/C no motor or transmission; there looked to be a v-8 904 in the trunk. The floor pan and trunk are rust free. Both of the rear wheel areas have rust and the passenger side rocker panel has pin holes. I...

Can someone tell me where to find the model number on this carb? I see a number on the drivers side which is P-80. On the top is 80508-1 under that number is 1431. Further down is the number 10569 Thanks Gene

The Demons 360 has an oil leak that is leaking about a quart of oil overnight. I see no drips or flows while the engine is running. It appears to come from the high rear of the engine on the passenger side. The area around the rear main and oil pan is dry as is around the oil filter. I've looked...

I have a 318 from a 1985 Ramcharger that I want to put in a 71 Demon (that I've had to walk away from more than once). However, the EGR ports to the exhaust ports have been welded closed. :banghead: Is that going to pose a problem? I wouldn't think so but I'd like to have some input from someone...

Well I finally took the plunge and have pulled the Demon into the shop to begin work (fun) on the front end and engine. I couldn't start the project until I took the before pictures. So the pictures have been taken and now I'm waiting for the energy to get started. As you can see the ball...

OK I should know better but I ordered a set of of Hooker Comp. Headers along with the 2.5 exhaust kit with Turbo mufflers from Summit for the 71 Demon. I started off this project gathering parts to add a little zip to the stock 318/2 bbl with the addition of an alum. manifold and 4 bbl carb. It...

Hello Folks, I found this site by blind luck and I'm glad I did. In January of this year my wife and I bought a memory from a fellow in Florida. The memory is a 71 Demon similar to one that we owned when we were first married. I'm in the process of fixing some things on it like bushings, ball...