Search results for query: *

Hello I have a 71 dart currently running a 360 with ld340 intake and dual scoop swinger hood. I am looking for a hood that will clear my new motor with w2 heads and Indy high rise single plane intake. Only thing I know of is the fiberglass 6 pack hoods. So I guess that is what I am looking...

currently the coil on the fender is hooked up. the msd blaster ziptied to the firewall was trying to find the problem. Thanks rick maybe my gap is too large. I will reset the gap to .008 and try again.

Hello I have a 70 dart with a built up 360 in it, and have ran into a wierd ignition problem. I cant get it to throw any spark with the dist in the car and cranking it with the starter. but if i remove the dist and simply turn it it will spark correctly. when i turn it by hand it seems like i...

What you are feeling is the rearend twisting down and the leafs bouncing it back up, over and over again. Anything that can cause the drivetrain to start bouncing. Its most likely the first two but here are some other causes 1.incorrect pinion angle-adjust pinion angle with shims to 4...

Rightclick- Set as desktop backround-Leftclick stretch-leftclick set desktop backround for windows xp

How does moisture stay in the wrap when the header is between 450 to 900 degrees??? IMO the extra heat that is not able to be released through the surface area of the header which raises the heat of the tubing greatly is what causes damage to the header. The purpose of header wrap is to...

that cam should work good. Got any pics of your duster???

Good info here^^^^^ My combo with the 107s and stock heads was pinging with a holley 670 street avenger. I have an air fuel meter and it was lean in the mid rpms even when jetted too fat on top and it was pinging on 94 octane with only 28 total timing and I couldnt bring the timing in until...

Cam http://www.summitracing.com/parts/CRN-693801/ Pistons http://www.summitracing.com/parts/UEM-KB107-030/

Here is my budget 360 build I used KB 107 pistons with the baddest street cam ever made.....LOL seriously I ******* love this cam crane powermax will work great with stock stamped rockers. Seriously the baddest street cam ever made Sounds a lil rougher than a stock 340 cam. I have 19 in of...

great info /6 dan!!!!!!

Wow nice work.....Is that stripper avail for over the counter purchase or do you have to be special to get some??? Thanks Dillon

Damn those Flexplates for them furds are super hard to find.......give this a look it maybe the only one in existance...lol...

Looking good John. Do not weld without a helmet. Yes you can get burned on any skin that is exposed. I have burned my eyes with them closed before. Doing a small maybe 10 minute repair without a helmet with my eyes closed. About an hour or two later my eyes started burning real bad and I...

Here is what I found after a little grinder time..... I am a little sick

Great price!!!

John here are some pics of my truck that I need help with.... Looks good from 5-10 ft right????

Here are the pics of the summit wires Should these have cracked this soon??? Or did I have them routed incorrectly. (see pics) Guess you get what you pay for.....here is the link http://www.summitracing.com/parts/SUM-G826/ Guess they wernt the street and strip wires here they are...

I didnt think to take pics while doing it but I removed the summit street and strip wires due to them cracking from heat and causing a misfire. I thought it was either the coil or dist. (Mallory L.E.D. Unilite dist and mallory super coil) So I bought a MSD blaster 3 coil and new mopar...

Thanks Guys....For anyone checking out my combo this thing is a beast and super fun to drive. I thought it would be a turd with the small cam and basically stock heads. But it is just as torquey around town as my 408 with alum heads and a hyd roller cam in a 65 dart. Way different story when...

Here are some pics of my 71 dart swinger. Specs: .30 over 360 J heads bowl cleanup 2.02 valve .10/.10 cast crank Eagle I beam rods KB 107 flattops Crane Powermax cam Intake Duration at 050 inch Lift222 Exhaust Duration at 050 inch Lift234 Valve Lift with Factory Rocker Arm Ratio0.467...

A 275/60/15 will fit on there without moving the axle. Just run 3300 lb super stock springs. Cheaper, easier, works great.

Advanced should sell LUCAS Racing oil in all weights. Lucas also has a zinc addative. I run 0w20w in my street/strip 360. http://www.lucasoil.com/products/display_products.sd?iid=276&catid=21&loc=show

I had this cam in my ss with your exact same combo except with 58cc edelbrock heads and a 750 quick fuel it made 488hp @6800rpm and 449ftlbs @5600 It pulled well up to around 7400.

40418 Cam Style Mechanical flat tappet Basic Operating RPM Range 4,200-7,500 Intake Duration at 050 inch Lift 256 Exhaust Duration at 050 inch Lift 268 Duration at 050 inch Lift 256 int./268 exh. Advertised Intake Duration 292 Advertised Exhaust Duration 302 Advertised...

I run res plugs in 1-3-5-7 and non res plugs in 2-4-6-8 Best of both worlds. And I used to race Nascar.

Great thread!!! Good info!!!

cast mopar crank 4 inch eagle I beams keith black 107 flattops untouched eddy heads rpm air gap intake 750 holley dp comp big m thumper cam hyd roller comp retrofit lifters just built one for $4100 It made 470 hp and 530ft in a 65 dart it runs 11.6 with a 275/60/15 bf drag radial and 3.91...

http://cgi.ebay.com/ebaymotors/Mopar-360-Keith-Black-030-pistons-/170526243739?pt=Motors_Car_Truck_Parts_Accessories

No extra machine work. Just alot more compression