Search results for query: *

Windlace

Look here these are new and not really a bad price. http://www.inlinetube.com/ Part number BLK250

Thanks all! I've got them coming from Barracudakid.

I need 2 clips that hold the heater control cable. See picture. Thanks in advance.

Mic the outside diameter then use a thread guage to get the threads per inch. With that info it might make them easier to find.

PM sent.

Yeah I guess it is. I haven't seen mine for a year. My Dad who is 84 cut the master cylinder spool off it put it up somewhere and thats the last time it's been seen. Do you have the bolt as well? How much? Shipped to FL 32904. Ron

I need a master cylinder push rod and mounting bolt for a 70 Duster. (The rod between the brake pedal and the master cylinder) Automatic transmision and manual brakes. PM me if you have one for sale.

Autozone lists a new one online for $36.99.. Siemens PM337... Advance lists the same one for $72.00. For as much work as it will take to change it I wouldn't put in a used one if it were me.

Steering and Suspension > Front Suspension Ball Joint and Hardware > Front End Seal Packages This Front Suspension Seal Package contains seals for tie rod ends, pitman arm, upper and lower, ball joints and idler arm. AddPart #DescriptionPriceAddl. InfoP5249226 Front End Seal Package...

Hope this helps. http://www.topsonline.com/index.php?DepartmentID=5&CarID=122&CarmodelID=827

Look at this thread for what I did to cure my column to floor shift problem. http://www.forabodiesonly.com/mopar/showthread.php?t=29317

No not polish...Just figured it would be easier to modify what I have than to hunt down one for a floor shift car. I just found out today when I was putting in the manual steering shaft I got from Redfish that if the bottom section is turned wrong (needs to be turned as if the shifter is in...

Here's what I did to mine to make it a floor shift column. I cut the shifter mount off dressed it upwith a grinder, taped over the hole on the inside and filled it up with JB weld for strength. (fiberglass would probably have worked) After it set up I dressed it down, used a little body filler...

Found all these parts. Thanks

I need a few parts I'm missing. All is for a 70 Duster. 1. Hood safety catch 2.Windshield washer nozzles (mounts to firewall and sprays up thru cowl) I know there is alot more I'll need and will post when my memory allows me to remember them. PM me or post if you have these or know where the...

Send pictures or post some whatever is easier for you. My e-mail: [email protected] Thanks

E-mail sent.

bump

I rented one and did my own. The machine shop only charged my son $20 to do his, it cost me more than that to rent one. I'd check w/local machine shop. My .02

Need a non a/c heater box for a 70 Duster. I need the box only. I don't need blower or heater core. Thanks

Here's a link to the page at AAR. $149.00 each new. http://www.aarqualityfiberglass.com/cart/index.php?cPath=26&osCsid=d30a0dc65ea31640f07868a89c6a348f

Yeah..No problem ...The only way I would attempt that for a street car is if I could replace the rivets with the proper ones.

I agree I'm buying a shaft from Redfish. I'm really not into the pain thing and that could leave a mark.

PM Sent.

Watch around...I found a complete drum to drum with 3.55, 489 case, sure grip for $600.00

Help....Need a steering column shaft for a 70 Duster w/manual steering. I cut the column shifter and the shift indicator off, plugged up the holes, dressed it up w/body filler, painted and made it look really nice. You can't tell it from a floor shift column. I have a lot of work in the column...

When you call AAR to order it you tell them what year your car is and they custom fit it to your car.

http://www.aarqualityfiberglass.com/

Don't hold me to it but I think if you want that wide of a backspace in a Cragar SS you will have to special order them. I went on Summit and the widest backspace I could find even on a 7" wide rim in a 14" or 15" was 4.125". I ran into the same problem. I needed an 8" wide rim with a 5.5"...