Search results for query: *

  1. R

    A-body 4-speed pedal question

    also some pedal assemblies use plastic bushings and the HD units use bearings.
  3. R

    Jeep Cherokee 8 1/4 to an A body ?

    The jeeps have an overdrive transmission so most of the jeeps have 3.55 or numerically higher gear ratios. Really check your local salvage yard good for a rear end. I went to my local salvage yard and asked if they had an 8 1/4 out of an Abody and they said no we havent had one for years, as a...
  4. R

    8 1/4 rear end , looking for advise on a surgrip assembly

    For my 8 1/4 Im planinning on getting a 29 spline suregrip and 3.73 ring and pinion from a jeep cherokee along with the rear disc brakes and then get custom axles built in 29 spline and stock a body length, Im tryin to build a gorilla 8 1/4 lol. also planning on a rear end cover that supports...
  5. R

    i heard a "POP"

    Will a stock converter work in a reverse pattern race 727?
  6. R

    i heard a "POP"

    No i havent called lenny, im pretty much set on a manual trans. I just hope the 727 isnt hurt & its just the converter that went bad
  8. R

    i heard a "POP"

    the outer input shaft of the transmission wiggles a tiny bit though, i dont know if this is normal or not because im no trans expert.
  9. R

    i heard a "POP"

    Ok i removed the transmission and to my surprise the fluid inside was perfectly clean & there wasnt any bits of metal in the pan, The converter looks clean too.
  10. R

    5 speeds KIESLER vs CMS

    i think cms is cheaper than kieslerbecause they have a sale, but with the cms kit you have to cut the crossmember ill check american powertrain, thx
  11. R

    5 speeds KIESLER vs CMS

    which place sells a better product for an abody? kiesler or classic motor sports group?
  12. R

    i heard a "POP"

    i might call them on monday
  14. R

    i heard a "POP"

    would 8000 rpm overspeed it? it hapened once at the track im hoping that its just the converter if its any more than the converter im going to switch to an 833
  15. R

    i heard a "POP"

    so if i order a converter for 28" rear tires i'll be stuck with 28" tires? this is why i dont like converters if you change your gear ratio and tires for street driving you'll hurt the converter. dam
  16. R

    i heard a "POP"

    i appreciate all the help thanks alot for putting me in the right path, i thought the problem was bad spark plugs!
  17. R

    i heard a "POP"

    so do you guys think the sprag is hurt?
  18. R

    i heard a "POP"

    my car has a .509 mopar purple cam and is 99% street driven i dont race that much
  20. R

    i heard a "POP"

    what converter do you guys recommened, now after reading the exploding tourqeflight thread i think my sprag is worn out because my engine has excessive rpm if i need to replace my sprag i might just switch to an 833 please dont say that i need a new sprag, lol!
  21. R

    i heard a "POP"

    hold your breath... its a TCI
  22. R

    i heard a "POP"

    is it because i drive it on the street, the converter isnt even 1 year old yet
  23. R

    i heard a "POP"

    you pretty much diagnosed my problem, how could this happen? i check my converter bolts and they are all still on, no heads are broken off my trans was shifts ok so do i have to worry about it?
  24. R

    i heard a "POP"

    thanks for the fast reply ok i took it for another drive, @ 3500 rpm or above the car makes a chain saw sound when the car is idling or when im slowing down i have to give it gas to keep the engine from turning off
  26. R

    i heard a "POP"

    the car has excessive rpm on the highway and city before when the trans was new the rpm's were considerably lower.
  27. R

    i heard a "POP"

    i was stalling my 440/727 @ a redlight & then i heard a pop. i was only stalling at 2K. the car is equipped w/ a $600 3800 stall converter & a $1000 reverse pattern 727. the car only has 6 passes on it so why did something go wrong? the car drove back home but it doesnt feel the same. it...
Back
Top