Search results for query: *

well the drive shafts and stuff are under a bench in the back of the garage. out of the way and not gonna get damaged,or tripped over. so Petty how are yours running?

49.9 measured from where to where ? got the 8 1/4 ready for paint,ready to go in got everything for the front-to go from stock drums to BBP discs just need new wheel cyls and calipers-the old ones I dont want to trust just need a new master cyl and to get the car moved I have brake/fuel lines...

the garage the car is in is not easy to get into the back of it just fits with about a foot to spare-its out of the way and out of the weather- not easy to climb under and measure properly,I was checking out rims I picked up in the spring,hoping the offset would make it doable,decided to see it...

yes it is a 9" I put it in myself about 10 years ago got it for free-open with 373 gears it is too wide-would have to make or custom rims with big offset or narrow it,dont want to spend the cash picked up an 8 1/4 4:10 suregrip just need to get a few projects out of the way and get it in the...

I currently dont have the 8 1/4 in the car-its a ford 9" I had the one from the 7 1/4 that was in the car shortened winter plans is to get the rear swapped i have a few driveshafts sitting,I either need the right one,or one longer I can cut if someone has one they car quickly measure for...

I need to know the length of the drive shaft I need I have a few sitting and need to know which one to pull out,wont be able to get back to the garage once snow arrives 68 barracuda fastback 904 tranny 8 1/4 rear I plan on pulling the ford 9" out this winter along with rebuilding the tranny...

thanks Fishy I have a few good books-older ones from the good old days :) I have read through them a few times and I do feel confident that I wont have a problem but I just want ppls opinions and suggestions-may as well ask ppl who have done it before for tips I am still a few weeks away from...

hey guys I am gonna soon be overhauling a 904 for my barracuda a few years ago I picked up a "power pachage shift/rebuild kit" from Mancini Racing- I have a few books,decent parts ect I know to take my time,lots of pics,follow instructions,procedures ect I dont think I wont have a problem doing...

if I am not mistaken same width as the F body-aspen volare a bit wide-never found out how much-a good 2 inch on both sides

the spring perches dont bother me-welding is no prob a plan is the inboard spring relocation-wider tires :) just take that into account when putting them in -years and years ago I put a 351W into a mercury bobcat-made it a bolt in the car was a 7 1/4-but the shaft was cut for the 9"...

OK I found out the measurements are from HOUSING flange to flange I need to remeasure the 9" Fishy68-thanks-I guess I will have to dig the 8 1/4 out and measure it the wheel track is about 6" wider for the F-3" for either side-according to allpar pages the wheelbase is supposed to be .8"...

well as I say I dont have much of a budget to get the whole car around if I could find an axle cheap I would,I have looked a bit,so far nothing but I dont think it would be cheap I see you are in ontario as well,where abouts? I am London area-sparta is the closest strip,alto grand bend and...

Good day everybody first I wanna say this is my first post on this great site-I havent needed to post,can usually find what I need. I am currently working at getting it on the road-its sat way too long been working on it for over 15 years Its my dads car that I am gonna be getting-just need the...