Search results for query: *

thank you for response, 35 degrees is what I was looking for, since I am still running about half tank of 87 octane I am bringing the initial up slowly. Also you are running 15 degrees centrifigal which with the high octane allows higher initial settings. I suspect if and when I get up to 10...

I have been advancing this 440 for some time now trying to find out what it likes. I started out with a full tank of 87 octane from last year when I pulled motor I am gradually replacing that with 92 octane. I am running closed chamber heads approx. 9.8-1 mild 222/[email protected] auto w/3.55 axle so...

finally got 440-6 pack on the road thanks to Scott Prestons help with my many wiring issues. So far this car is not all I thought it could be although it seems to make decent power to 6000 rpm. This 6 pack set up is rife with problems,leaks,maladjusted parts. But now on its first maiden run the...

you are the first person to offer me some info...the dist is Mallory prestolite, NO POINT, I think it is some kind of photo cell. on the negative side of coil I have black ,green and I am sure this is correct as the car ran well before I took it apart and moved the loose alt around on the K...

yes this is a squareback alt. on the bottom threaded post there is a violet and black and since this was never removed it should be correct. Is this alt grounded by short wire to valve cover,I found wire in chasis that could be used for that. also coil wires were never removed and should be...

red, this was a fine running setup until I pulled motor apart. it has Mallory prestolite dist, red,green,brown going in, brown coming out and LOOSE, where does it go? I do not need to change anything I just need to attach another wire to back of alt if necessary, as of now I have loose wires...

"B" body- I have GREEN wire going to top center of pushon clip marked FLD, is this correct? WHAT is the color of the other wire going to the other outboard pushon clip? 1968 car, ALSO if you are still looking for me where does the BROWN wire go coming OUT of dist...somebody PLEASE,, thank you...

email address [email protected] (coronet) thanx

I have had my motor torn apart for a month it is now all back together with all new machined parts,cam,6 pack setup. But now I have everything hooked up but the following wires which are all within 6" of alternator. Alternator was lying in chasis and moved around alot and wires probably came...