Search results for query: *

It does sound like a good investment. I have seen them on E-bay and think I will get one. As I understand it Chrysler introduced them because the seals and caps kept failing and the poor mechanics were constantly fixing them. Thanks for info will make a note of it when I get mine.

It has probably been done before but this is how I made my life easier with reattaching the new seal and cover. Once the body was snug on the column I used 3 of my wood working grips to hold the cover as tight to the body as possible then I went around with a cold chisle for a first tightening...

Thanks for letting me know. I was scratching my head over that one.

There isn't a hole which has me puzzled.

Hello Everybody, Firstly I would like to thank everyone that has posted on this thread all the information has been really helpfull. I have one silly question. As per the picture supplied by Mderoy are all the coupling bodies supposed to have a dowel pin at the top near the seal. Mine does not...

Thanks for that I will check it out today.

Thanks for the advice I really appreciate it.

So I don't know if anyone looks at these old threads but this is the end result. I had the local engineering shop remove the outer column and replace it with a new column as close as possible to the inner column. Has worked out fairly well. At the end of the day as long as I can keep the...

Hello, Appreciate any tips you might have regarding the installation of my steering coupler. Long story short I had some work done on the steering column for my 68 Plymouth Valiant. Unfortunately what I didn't expect was that the guys carrying out the work would remove the steering coupler from...

Thanks for the info, much appreciated.

Thanks for that I got it on Rockauto. Really helps if you know what you are looking for.

Forgot to mention that I only found it by punching in the part number, which I wrote down but now I can't find it. Couldn't find it doing a usual search.

Thanks for that. I got lucky and scored the genuine Mopar product on Rockauto for $15! They had 4 left at the time.

Hello Everybody, Silly question time. As per the pictures can someone please tell me what the box at the end of this steering column is called? Are there rubber seals or rebuild kits available for them? If you know of a thread where this has been discussed previously please point me in the right...

Thanks Steven, my plans are as per what I just described below to RedFish.

Hi RedFish, I want to retain the original look of the car ie column auto, however for driveability I need more clearance between the engine and the steering column so would like to strip it down to nothing but the column. Because what I have been told has been done before is to relocate any...

Hello, I have a couple of questions re A body steering columns that I hope you can help with. My car is a 68 Plymouth Valiant. It has a column shift auto. Can anyone tell me what, if anything runs through the housing surrounding the top of the column in the engine bay as per the attached...

Hello Everybody, It is a stupid question but I need to check before I go ahead and do anything. Will the axle from a 67-69 Dodge Dart simply bolt into a 67-69 Plymouth Valiant? Or is it more complicated than I think it is? Thanks for you help. Regards, Ron.