Search results for query: *

How much do you want for it?

yeah, you can get one through Brewers, if you want to drop $2000 http://www.brewersperformance.com/products.asp?cat=90

Anybody have information on this column mounting plate?

Thanks, i posted this question before these replies. now i just have to wait for him to give me a total with shipping. My four speed conversion is coming together!

Hey guys, saw this flywheel for sale on here and im thinking its neutral balance, which should work for the 273 in my 65 dart im converting to a four sp eed. opinions? http://www.forabodiesonly.com/mopar/showthread.php?t=201304

tried to pm you but couldn't, your inbox is full

Hey guys, I'm not quite comfortable rebuilding the tranny I just bought, so I'm looking to see if someone within 3-4 hours of South Carolina would be interested in rebuilding it for me. It's a '64-'65 ball and trunion style. It'll be the end of next month before I'm ready to get it done...

I have a dumb question. On my '65, I don't see a place on the firewall where the pedal to z bar rod goes through. On my '72 I had there was a body plug over a hole for the rod. Am I going to need a different lower column mounting panel like this...

Well, I went down to Atlanta and picked the 4 speed up yesterday. He had the cover off, it looked perfect inside. I'll probably at least replace the seals inside, might go ahead and just do the full rebuild if I can figure out how

Hey guys, I found a guy who has an 833 from a '64 dart with the same ball and trunion style output as my '65 gt with an automatic has. Does anyone know if the driveshaft lengths are the same, or will I have to have mine shortened? The best part is, the guy wants $75 bucks for it, says he had...

Well, I decided to just go ahead and take it apart and see how the plastic bushings were The .500" shaft on the clutch pedal was corroded a bit, so I took some 600 grit sandpaper and it cleaned it right up. But the .500/.560 plastic bushings are worn pretty bad, but brewers has them. does...

no play or slop in the shaft at all, the brake pedal just doesn't swing freely when pushing it back and forth. I'll give the lithium grease a shot

Hey guys, I got a set of pedals for my '65 dart from a great guy off here, and before I put them in I want to make sure I'm not going to have to take them back out. The brake pedal is a little sticky, and I wanted to know if there's a rebuild kit for these (haven't found one at brewers or...

Hey guys, I'm in the process of getting stuff together to change my '65 dart gt from floor shift automatic over to a four speed. I read the thread on using the wilwood hydraulic master and slave cylinder and am wonderinf if I should (or what the advantages would be) of the hydraulic system over...

So, I got a basically complete four speed setup, but it's from a 69. The guy I got it from seemed to think everything would change over, but he doesn't deal much with the early a's. I'm pretty much certain the pedals won't fit (the early pedals straddle the steering column, right?), and I...

Thanks, I'll check out Brewers

Nobody? Should I have posted this in the early a section?

Hey guys, I have been collecting parts to convert my '72 dart over to a four speed. I have a bellhousing from a '72, a z bar from a '69, a couple flywheels and a used clutch, and a floor hump. Well, I found and bought a 1965 dart gt from a guy here who's had been here a long time, the...

I'm gonna keep harassing him till he either coughs up some parts, or gives me some money back

I forgot about the clutch and pressure plate, I don't know how to check if I can reuse them, though. So yes, I got a 3 speed transmission, flywheel that needs a ring gear, floor hump, and unknown condition clutch and pressure plate. What's the hollander circuit? And how do I tell if mine is...

No, his name is Johnny Kelley. Long story, but I think he screwed me a little bit. I ended up getting a floor hump, flywheel(that needs a new ring gear), and a three speed transmission from him for $250. After I paid him the $250, he said the bellhousing and shifter he had was stolen. He...

Did you find a flywheel? I have one, it'll probably need a new ring gear, but I have a friend who has a blanchard grinder and can resurface the face

Hey guys, I've been looking to switch my '72 dart over to a four speed. I've asked everyone I know, and finally found a guy here in town who's an old drag racer, so I called him and he told me to come over and we'd find out what he has. So I go over there today, and he opens the garage doors...

Thanks guys, there were no shifting rods or mounting plate with it. I don't even know why the shifter came with the car when I bought it, the car was a 6 cylinder automatic, and there were no other four speed parts there. I worked it when I had it, and didn't notice any looseness or slop. I...

nobody?

awhile back, I bought a '66 mustang, mostly in parts, thinking I'd restore it and drive it. After I recovered my sanity I sold it and finally found my '72 dart I'm driving and working on now. The mustang was an automatic, but in the trunk there was a Hurst competition plus shifter. It didn't...