Search results for query: *

Tkank you all for the info!! I am trying see what the compression is so I can pick a cam/intake/lifters/carb ect. I would like to get the most HP out of this block without having to sell the farm buying new pistons and rebuilding the bottom end again is not going to happen. This is my first...

no crack just looks like it in the picture

I know this is not a good tool but its what I got!!

Yes that is what I measure at TDC with the gasket too

So I pulled the head off and with the gasket in place I measure 3.969" to the bottom of the stroke and .204" to the top.

Ok I cannot find specs on these victor reinz head gaskets they came in a 440 gasket kit part number is 95-3344vr. My head is going to explode. I cannot find specs on the web !!

I will have to remove the head to see!

They are stock style flat top pistons. And they are victor reinz gaskets not sure how thick they are but i measured about 1mm

I need help. What is my compression ratio? I have a 72hp 440 block, stock 3.75 stroke crank , 40 over pistons 440 source stealth heads with 80cc chamber.

wow!! sorry for all the hard feelings and chaos . I would like to thank every body for all the input. I was checking this post for the first few days no one had responded I just got back in town then bammm!! I am puting together a 440 alot of parts are handme downs and this combination...

Here is the deal I have a set of roller rockers with .400 offset I know that stock heads do not need the offset but will there be a problem if i install them. I just do not want to find out there is clearance problems the hard way.

will .400 offset roller rockers work with stock 346 heads??