Search results for query: *

i had a cambell housefeld for a few years 15.6 cfm at 100 psi. just did the job running da and inline sanders but when i would run my sandblaster i would have to stop after 10 minutes.it was 7.5 hp and 80 gallon bought used for 500.00 sold it and bought a international commpressor with80...

24x24 is not bad, as long as you do not plan to yank any engine out!. i also had a 24x24, but once a vehicyle was in there, did not leave me much rooom at the front to work under the hood. now i just exspanded my 12x22 shed that was on my property when i bought it, and one bay i made to be...

yes, they do have the 4 wheels, plus, i was going to weld the units together(when i bought them, they got bolted together)

right, i plan to cut the uprights and insert square stock into them, and reweld them. also plan to add side to side supports. i was just wondering if you guys think the pot metal like wheels will hold up even if used on concrete. also, i am not worried about turning the car completly over, as...

i have two identical engine stands. both rated at 750 lbs from harbor frieght. they have the metal wheels. i do not plan to move it once the car is on on it, but has anyone ever tried?

:)

my question is, what was the porpouse of the concrete pump truck? was it so the concrete fell down on the heating system, to reduce it from moving sideways, as if you poured right out of the truck?

i think it may work if you use that water based cleaners. but i have not had any good luck with the w.b junk!. i think the chemicals in any other stuff would destroy the internals of the washer. or, maybe purple power would be ok in a dish washer. try it and let us know!.lol

yea, i put up a 20x20, and wish i would of went 40x60 !

i would say the blast cabinet has seen better days, by the looks of it. it needs new gloves,a nd sure some metal walls are getting soft. i say you may get 150.00 tops for it, even though it is a snap on.

yea, but the problem is trying to get in between the wheel well and the inside of the quarter panel is a nightmare, with no room. h.f hand winches.................... garbage bought one to pull a light car on a trailer, and if you do not keep the cable in the center of the spool at all...

oh, i did buy a devilbiss gun. use it all the time! oh, another h.f tool.. punch and flare pneumatic tool............................ works great on new metal, but if you try to go over the old quarter area to flange it, it gets clogged with the tar like material. would not buy another one

do not worry, otr, i will go out in the garage tommorow, and evaluate everything else i have. !

continued...... frame straighening hydraulics...... they have worked great for me, as i bought them just to use on the front ears of a 2000 chebby extreme. them suckers made me like 3k in under an hour! 36" shop floor fan. works fine. no complaints. floor jacks.... i got the cheap...

ill also give a rundown on h.f tools, as i have spent 10k in their in the last year. please do not critisize me, anyone.lol i have... stud dent puller.......... work great, but the puller itself is garbage with the smallest studs that come with it. the bigger stud you use, the better it...

huh????????????????