Search results for query: *

Lock strip on 67 Dart was $325.00 a set when in stock at Stephens Mopar. Switching over to reveal molding isn't much better with addition of clips rivets and screws either. Re-use gaskets and clean with mineral spirits. They clean up better than you think. 67 4 door glass parts are a pain in the...

Make sure to remove old filler and clean very well before refilling. John.

If you're talking trim around windshield or back glass then; Generic trim tool from my local NAPA. Also could probibly find at Advance, Auto Zone, ORiely's. pep boys... Hook tucks under trim. You run it untill you feel it catch. Then you leverage the clip to release trim. It's a technique...

I was told also not to leave your paint in an unheated garage in winter. Bring it in the house. Although I didn't know that before so I guess the other paints I had last year are garbage. Really, what do I know? I paint in my driveway. I do push the envelope constantly on what NOT to do and how...

I've got some ideas about how to on the front bumper of our 74 Dart Custom (Lump). Sometime this week I'll have Lump on some stands and see about tucking that front bumper back towards the car more and delete the front bumper filler. That filler is a piece of crap anyway. I was looking at...

Not my preference but, There is a guy who owns a body shop here locally who does the rhino liner at his shop. 5 or 6 years ago he sprayed his entire Durango (red) with it for advertising. It looks wild!! I'll try to grab a pic of it today and show ya. But anyway, it seams to be holding up OK. It...

It's a great idea, especially now with the shortage. 2 words; MINERAL SPIRITS (see pics) It's a real job and a real mess, but worth it now. I even have a pre-cleaned old 4 door winshield gasket hanging in the garage for the next time!! The gasket after drenching with wet rag and rubbing it...

Cause every one parts them for 2 door cars! 4 door gaskets are approx 2" taller than 2 door gaskets. The 2 door post is same as 4 door though.

I usually grab for same shaped or close, from any Dodge Metal in the Junk Yard. But I'm sure there is probibly a correct answer on the right way but the same shape or close Dodge metal in the junk yard is all I know. Good Luck!

X2!!! Well worth the $100.00!!!! Besides if it leaks, then they have to redo it not YOU!!!!:!: If they break it on install, thats them too not YOU! Said it, done! LOL!

The 4 door or 2 door "post" versions of the glass is approx 2" taller than the 2 door "Non Post" cars.:read2:

I'm thinking 2 tone mod top FOOSE style!:cheers: See Link of ours, post #112 and on!:read2: http://www.forabodiesonly.com/mopar/showthread.php?t=77304&page=6 We have another vinyl top 4 door that is light tan. Were thinking burnt metallic orange & pearl white "Surf" style paint based on the...

X2!!!!!!!!! That's one of the top 3 trim lines on Darts in my humble opinion. The point on the front with the upward swoop in rear just screams MOPAR more than most all other trims along the belt line. Take a look at the belt lines on the chargers too. Remind you of your 67 belt line? Yes I...

ON THE BACK GLASS; The trim is held on with trim clips. The bottom ones rust out first due to water and crap resting there. After pulling glass clean fence and inspect real good. May need to do some body work around the fence where the gasket meets the body. Good Luck!:read2:

http://www.forabodiesonly.com/mopar/showthread.php?t=45848&highlight=drip+rail+tool Good Luck!8)

I'm totally stoked, no more wet thighs, at least due to leaking doors!!:-D

I just took a full drivers side rocker/post/splash/Apillar clip from a 75 SE 4door and it had 2" wide clips for rocker moldings, I assume the were "Full" due to being such wide clips but did not see the moldings. They made 2 levels of the SE. the one like our Fern 75 and 1 like the one in the...

Oh, I am sorry spikekid999, Those 2 pics you requested only come as a set of 4!! LOL!!:toothy10: I think they are all alike on the 4 doors for all those years. However, I have seen some that were 1/4" wider and a little more round at the tips. Rocker Moldings or Spear Moldings pop up on ebay...

I've got em on my 67, 69, 74, and 75 all 4 doors though.:read2:

Drivers side?8) Mine was the tabs already mentioned and is 9 times out of 10. Others are windshield corner (gasket pulls away) Rivets/screws for clips rust a small hole Drip rail could have a small one running down the pilllar Vent Not enough sealant between glass & gasket Not "...

No worries, it's happened to every one so far. The back glass in avitar car was resealed by glass shop 4 times! I'm still going to pull it again, it was my first and I want to redo it right! Did you seal yours up before it rained? Is it Ok to get wet so soon after sealing? Not sure I'll do...

Funny you post this today! I've had Fern out now for 2 days and has been raining sense this AM. Looked inside sense we had just put that winshield in. There was a small puddle drivers side, After laying on the wet rusty floor couldn't see real well where it was comming from. I found a gap in...

When you go to apply sealant, heat tube on furnace register in house or defroster in car, lay in sun for hour. Then use as directed. We've been known to have a wooden box with a heat lamp inside for this!8)

Dude, You have to email me the drawing of the clip/gasket!!! Your drawing is right on man!!! You can even see the screw holding the clip!! AWESOME!!!! You catch on quick!!!:cheers::read2:

Wait a couple weeks on the trim replacement. That way we don't have to take off twice. Just clean & polish and PUT AWAY safe place for 2 weeks. Keep checking for leaks. This might work! If not we go on! We regroup for trim install later, and you can always sell clips or sell them to me for the...

Yo Pics Man!8) Try just this first, it's easier & cheaper & may work!!8)

Nice drawing! Clip & drawing correct but..... We are romoving to reseal? Or windshield broke. I'm pretty sure its just leaking. I would do this before we get crazy with everything. Lets go cheap and easy first. Take off rest of trim carefully. This will releive enough pressure to be...

Looks good!

Hey fredsmedina Not intending a hijak but I just noticed I can repaint BOF this cool color! Hey 67dartgt340! Check the pics!!!!! Check my 67's fender paint code! I told ABB I wanted to paint her the original color but she didn't think it would look this good!!! I'm buying paint for...

DANG!!! Please tell us where to get it!!!! Who did ya score the lockstrip from??