Search results for query: *

I did the same. 1/2 inch Alum spacers worked perfect. I had 1" spacers but they looked too much on the car

Get your offset kit from DR DIFF . it is a great set up!

Here's a thread I made showing how I did mine http://www.forabodiesonly.com/mopar/showthread.php?t=194169

I did not want to hack up the frame or even drill it. Putting 4 new holes in the frame bracket would be cause of concern for weaking the area. I went with the DR DIFF kit. Right up against the frame, no drilling and 4 spring height settings. 2 on the bracket and 2 additional if you...

Hello Again, I am in Florida for the next 2 weeks so pics will have to wait until I get back. I will post them. I installed longer studs for the Dr Diff Hangers but probally did not need to. I am happy how it turned out. I actually flipped the hangers upside down and swapped them side...

Hello, Figured I share with you how I moved my rear back. I installed new 255/15/60 tires in the rear of my 67 Dart with new 15 x 7 cragers. I did not like how close the tires were to the front of the rear fender. I researched threads of how guys moved thier rears back. Most used the front...

X2 Dr. Diff

DOCTORDIFF.COM, THe best kit out there IMO. No holes to drill in frame and very easy to deal with. http://www.doctordiff.com/

I was in the same boat as you. I did want to do a complete relocation kit but did not want to attack the frame. Grab a Offset kit from DR DIFF. I have installed it on my car and it does make a diffrence and is a very easy install. Yes, you will have to get someone to weld the relocated...

DOCTOR DOFF, No hole drilling or cutting of frame http://www.doctordiff.com/

The bracket also has a countersunk drilled into the face to match

Mine are on already but if I have to remove tham as I finnish the car I will take some pics. It slams tight up against the frame . They are a nice prof set.

I just installed a set onto my car. NO HOLES OR CUTTING DENTING NOTHING. I purchased my offset kit from Doctor Diff and his unique Offsets do not require any mods at all They tuck right up beside the frame. THanks Cass!! http://www.doctordiff.com/

PST Thanks for making us aware of your product. Do you also have offset kits? Also if the shipping costs are a problem, have them ship to a parcel place close to the border. I have my stuff go to a US Parcel location, drive the hour to the border, cross, drive 10mins , pick up a whole...

Does anyone know of a supplier for the offset rear hangers that have multiple hole locations for the spring. I would like to be able to move the spring around like the RMS relocation boxes. Thanks

I am interested but with a 67 DART and 360 / auto will they ride rough?? should I go to a .9. We have lousy streets here so I am concerned about it riding like a truck

Is it common to upgrade to a 1" for street use? Small block

Hello, I want to consider installing offsets on my car. When I look at the front hangers I am not sure how offsets can work when the spring and hanger is right up against the frame rail. Can anyone shoot and post pics of their offset install and the front hanger in particular. THanks

Hello There. I want to raise the front end of my Dart. Can I smply crank on the front torision bars? How much height can I gain? Is there any special procedure or do I just take weight of the wheels and start turning? Thanks

Thanks for the info. I went back and checked my Mopar shop manual and low and behold all the specs were there including the shackles!

Hello, Can anyone supply me with the torque specs for the U bolts and both front and rear shackles? I am changing from stock to SS Springs on my 67 DART. THanks!