Search results for query: *

I like the Indys....My car off the trailer untuned and no traction went 10.96@123 with a 1.73 60ft.I had stock leaf springs and Nitto 275/60 drag radials. Also left the rev limiter at 6100 rpms mph should be higher after i get some super stock springs and a better tune up

Thanks guys...I bought the Clayton Smith pump and a Robbmc 1/2" sending unit!

Im gonna try these guys! http://claysmithcams.com/index.php?route=product/product&path=49&product_id=87

So whats the best mech fuel pump to run on a 600-700 hp big block mopar?

Have you ever tested the Mopar 452 aluminum heads?

Sounds god to me!! Thanks!

How much bigger are the ports?

So your saying i can get away with using the stock ports on the intake and not have to get it ported to the mw size? How good was the resuts and what gasket did you use? Im assuming you had to trim it to oprn the ports?

Sweet..Thats what i want to hear!! But i think im just gonna try to sell my alumn 452's and by the ez heads.. Thanks for your help Adam

So i would have to port the victor intake to mw or can i just slap in on and use bigger gaskets?

So you make good power with the 452 heads then? hmm Im thinking for 500" they are too small? Thats my problem...I cant decide to use the 452 alumn or go bigger!! ugh

Change the pistons? lol They just got installed!! Please explain? Thanks

Im loooking for 650+ and im using a flat tappet and a victor intake

Thanks Guys.. I bought the Eagle kit with Mahle flat tops -8,.055 over so its 500" The car will be mostly driven to shows and cruising on the weekends and a maybe a track run once a month. Im not worried about compression..that Pump Gas theory is bs..I already own a race gas that i spray a...

Can a Victor 2954 intake be used with Max wedge ports? Or does it need to be open to Mw?

Brian your saying stick with the 440EZ head without the max wedge port? Standard port? I will be using a Victor intake and yes flat tops Mahle -8cc as advertised in Eagle Products. Arent he mw ports big? Will they match my intake? Thanks Adam

Im looking to buy a new set of BB Chrysler heads.. I have new shortblock stroker being built and was gonna use some Eddy RPM heads.But I called Indy about thier 440EZ heads and Russ told me i was gonna lose around 100 hp if i use the small Eddy head.The motor is under 500 cubes and around 11.0...