Search results for query: *

The aluminum SM rockers will hit the retainers......they will only fit if the valve spring retainer is stock diameter....I believe the ones on the sm heads are larger....

Use the felpro gaskets.....if I remember your pistons stick out of the deck....You will need the thicker felpro head gasket to keep the piston the head clearance around .035 ..... the blue felpro are .053 compressed which fits works great....

The Out look is very good.....He said I got bad news for you....You are going to live....lol.....Have had a few other "small problems along the way"....... Gall Bladder needs to come out...LOL Engine test stand is great...Broken in 3 engines last month....Friend around the corner with 68 Dart...

they use the same head bolt or stud kit as an eddy aluminum head. The only SM rockers i have ever used is the Stainless Steel rocker arms, they look identical to the PRW. They are all out o of stock on them.

Good luck

you can just bypass the NSS .....on Starter Relay Switch the Terminal G goes to the NSS....run a wire to ground ......bypassed

Maybe I did call a few things...lol

you need to divorce your wife and marry my oldest daughter if you even want to ride in it...LOL can pay my taxes if you want.... you should have taken the power bleeder with you....

the carburetor is a controlled fuel leak

have a set just picked up at the machine shop in back set of truck......just help yourself...lol

if you come over...i have one you can use ...and see if it works.....

Is that a new proportioning valve?

me changing engine.....

Changing engines.....lol

Rent...what is that.......

yeah..you got 3 kids March 12 and 13 are just Test n Tune....practice...knock the rust out of the car and driver...spectators/crew are ok

There is a race schedule but it is not post on their website...that would be too easy.... That weekend there is a NHRA Div 7 Divisional Race...but Participants only are allowed... which means you need a racer to sign you in as a crew person...lol

The TnT are alot more expensive then the midnight madness.......about 3 times...lol..... 75 dollars tnt....20...for midnight madness

my duster does not have a race converter in it....like a 2300 stall... wait for the midnight madness races for street cars..

well...next week sometime we switch gears ....need to get a couple of race cars ready for TnT on Saturday March 13

I have a camber/caster gauge also.......lol still got two girl friends too...lol

I have a pressure bleeder that takes care of that.......when you get old...you find the easy way of doing things....and being a one man show... welcome to borrow it.....

I asked if he was able to get the car to die went screwing in the idle mixture screws and he had never tried...they were about 1 turn out....So i just started on one of the rear and screw it in and back out 1/2 turn just to see where we were going...the idle speed picked up which told me it was...

ok...What's for lunch.LOL

I am the man...if i can get it to run cleanly,,,lol.... I will bring a **** load of parts...including another carb.....

what day is good for you......Saturday or Sunday?

yes...smell the oil make sure it is not full of gas......

smart woman....lol it will be easier for me to drive over there.....

Where are you at with the idle mixture screws?

Almost looks like a real engine now....lol