Search results for query: *

I'm running 225/60-15's on the front of my 71 with 15x7 rims with 4.25" of BS and the fit is great- no rubbing. My car is lowered a bit too. I want to say that my tires are 26.6 inches in diameter.

Yup, Westleys Beach White- Good stuff

Badass!!!

I'm running the "no bulge" on my cop car rallies.

I had aluminum dog dishes over my 3" studs and no clearance issues. Just took them off because the color didnt seem to go with all the gold.

Very Nice- I love the matte paint with the gloss stripe too. Good choice

If you measure inside the mounting lip they're actually 7 inch rims. I'm running those on my dart. You have the kind that will accept a center cap too-

I run 225/60-15's on a 15x7 rim with 4.25 BS onthe front of my 71 dart (same whel well in the front?) and they fit great.

Yup. 4.25"

Like Skip said, theres now way I could fit that tire under my 71 with that BS. I've got 15 x 7's with 4.25" BS and I fit 245's. With another .25 I could squeeze in some 255's (someday).

MUCH better than the black on that car. Very wise choice!

They dont look a whole lot different than the cop car rallies. I think they might look good in a semi flat black.

Here's my 71 with 15 x 7 cop car rallies on the front and rear. Backspacing is 4.25 inches on these rims. I've got the fronts at 225-60 and the rears are 245-60's. I'm fairly certain that if I had another 1/4 inch of BS I could fit 255's back there (someday).

I have 15 x 7's on the front of mine with 4.25" of bs and thats as close as I can get to my Upper Ball Joint. I would "think" 8's would stick out a little too far past the fender.

I have an 8.75 rear with the yukon axles that have a b body offset so my 15 x7 rims with 4.25 BS will only allow a 245-60-15. I am positive that with another 1/4 inch of BS I could fit a 255-60 in there (lots of measuring!). If you have a stock a body 8.75 it may work as it is. be sure that...

I think its hard to beat body colored steelies with dog dish caps but thats just me. I've never really been a fan of rallies on most cars.

Got a pic of the car to help us decide?

I think it depends on the rims. I have 245's too with a 15 x 7 rim with 4.25" BS. If I had another .25" of BS I'm sure I could fit a 255 under there. I may have to roll a fender lip though since my axle isnt perfectly centered. Too bad you dont have a buddy that will let you mount one to see...

You can run them on the back depending on backspacing of the rim. I have 15 x 7 cop car rallies with 4.25 inches of BS and they fit well. I run 225-60's on the front and I think that as big as I could go with the same rim.

A lot of chevys used that pattern didnt they?

I run those on the back of the 71 dart and have no issues. I would think you should have plenty of room with a Duster.

I put SS springs and new poly bushings on the rear of the dart and I have about 3/8" between the sidewall and fender lip. I have yet to see or hear it rub at all. I did have to roll the lip on the pass. side cause the rear wasnt perfectly centered under the car but the clearance is the same as...

I went to BBP with my 71 dart grabbing everything including and bolted to the upper and lower control arms from a 73 dart (didnt need the lowers but they were included). Disk brake cars used a larger upper ball joint so you'll need that. I think I paid around $325 for the whole set up and...

I run a 225/60 on the same rim dimensions on the front of my 71 dart and I like it. The rear I'm not sure but that backspacing may be a problem for you unless you have a lot of room. Put the rear on some jackstands and throw one of those 15 x 8's on there and start measuring to be sure.

Lay the rim flat on the ground with the bolt surface facing up. Lay a straight edge across the diameter of the rim (you may have to deflate the tire a little if it has one on it) and drop a tape measure down to the face that sits against the brake drum/rotor.

I've got to agree with Soul on this one. I run the same rim dimensions as he does and the same size tire on a 71 dart. I thought you Barrcuda guys had a little more room to work with there. I'm SURE if I had another 1/4" BS I could run a 255. I'm close to the lip but have a lot more room on...

I run 225/60-15's on 15x7 cop car rallies (4.25 BS) on the front of my 71. I lowered it a little with the t bars and have no rubbing issues. I have 245/60-15's on the back with the same rims. After a lot of measuring I figure I could run a 255/60-15 if my rim had another .25" of BS. Maybe...

I dont have a 67 Valiant but a 71 dart cant be too much different so I'll give you what I'm running. 15 x 7 police rallies with 225/60-15's with 4.25 inches of BS. I wouldnt think that 5 inches would hurt any but measure as much as you can before you order. Edit: I just checked out the...

Whats your backspacing on the rims? I dont think you'll have any problems though, I run 255/60-15's and 225/60-15's on my 71 with no clearance issues at all. 15 x 7 rims with 4.25" of BS.

I've got a 71, so not much different. I'm running cop car rims with the same dimensions. 225's on front and 245's on the rear with SS springs. Im running an 8 3/4 thought with BBP Yukon axles which have a different length from flange to mount plate. If I had 4.5 in. of BS on the rims, I...