Search results for query: *

Ok. Thanks. I was assuming they were a stock style. I've got a 73+ k member. So that's what I figured. The no clipping in the piston threw me. Lol

And shouldn't my inner pad click into the caliper piston? Because it doesn't. It's just floating there.....

I'm in the process of bleeding brakes....kinda curious what this setup is. It's on a 67 Valiant.

I'll give it a look.

They aren't. I've spun the wheels and applying the brake stops them.

Yup. I've got a gusher in the front half of the MC. Which would be the rear brakes... Weird..

Ooh. May do the 13/16 then. My fronts aren't doing much at all.

Excellent. I was going to go with the 7/8 cylinder. Thanks for the help!

I've got a 67 Valiant with manual 73 and up front discs and 8.75 11x2 rear drums. I just swapped the orig. master cylinder to a 73 and up power master cylinder. What rear wheel cylinders do I need? It has the original 3461776 cylinders right now. The rears are locking before the fronts. Im also...

Appreciate it! Saved me quite a bit of money!

But it will work for non power brakes, correct? And will I have to change my pushrod?

What years? 73-76? Was it a cast Iron MC or aluminum?

Looking to get this for my 67 Valiant 73-up disc front, rear drums. I was going to go with the 15/16 bore. Do I HAVE to get the adapter? Its an additional 25.00, just curious if its something I need to have. *EDIT. Nevermind, I see its to fit the newer style MC.. Mopar Aluminum Master Cylinder Kit

Is the 73-76 MC a direct replacement or are there any size differences?

Good info. I'll check this out!!

Manual brakes. No booster.

Lol. Yeah. Makes me wonder what the deal may be.

Yeah. I saw no fluid. And the firewall is clean as well.

The rear end was out of a B-body I'm assuming. Its been narrowed.

Ok, sorry for the delay. I went home last night. First off. The rear reservoir was empty... Last I looked. It was full, theres no fluid on the wheels or on my floor. So, I put fluid in, cracked open the bleeder on the drivers side and bled it. Spun the tire and it grabbed when the pedal was hit...

I'll check on this as well once i'm home. Appreciate it.

The MC is the stock 67 manual MC. I will have to look at the bleeders once I'm off work. (Bad Memory)

Im meaning what brake lines go into it? Between the MC and the dist block?

Thats what I assuming. Now..... WHERE would it need placed is my next question? And what would you guys recommend?

Stock MC. The rotors on the front are rusty/dirty. I.e. no pad contact. The block has the electric tab for the dash brake light. Im at work right now. Ill get some pics after work.

Ive got a 67 Valiant with a 73-up K member. So, disc on the front and the rear has bigger drums. 11 inch Im assuming, 8.75 rear end. Manual brakes. My issue is I have no front brakes. All this work was done when I bought the car, so i have no idea whats needing done. The brakes lines are being...