Search results for query: *

Heater Control Valve Factory Part Number 3579173 NORS 1971-73 CHRYSLER DODGE PLYMOUTH FULL SIZE W/O AC HEATER CONTROL VALVE | eBay Replacement MOPAR 3579173 DT 72-79, 80 TO ½/80, ALL VAN, WGN Valve Heater Water | eBay There may be others. Alan

The one I have is the AC one. Alan

I'm pretty sure the lower lever is the same on both AC and heater controls, so the pin should be the same. Alan

I think I may have a control assembly in storage. I'm sure others have loose ones as well. Alan

It was about 35 years ago, but yes they were the same. Alan

I had someone make some out of aluminum. Alan

Most likely 2863206 & 2863207 Alan

The 68/68 number is most likely it. The number is just 2 off the the lower hose used in 67. If you have a broadcast sheet for a 67 a-body 383 car it would be on there. Alan

$325 https://www.hamtramck-historical.com/images/dealerships/SalesmansPocketGuides/1965/65_Barracuda_2.jpg Alan

2785614 is the part number Alan

The 68 is reproduced and fits perfectly. Alan

Yes, I have the 68 V8 shroud on my original 67 V8 radiator. As-is, no modifications. Alan

I have an original 68 shroud on my original 67 radiator, fits with no issues. I think the measurement left/right on the mounting holes is different between the two but the holes on the shroud are slotted and fits easily. Alan

look again, there is a gasket between the baffle and the housing and a second one to the block. Alan

HEATER BOX COWL J ROD 67-71 DART CUDA DUSTER DEMON SWINGER SCAMP MOPAR A-BODY | eBay HEATER BOX J ROD 67-71 DART GTS CUDA DUSTER DEMON SWINGER 340 SCAMP MOPAR A-BODY | eBay Alan

There are some on eBay right now if it is the early one that he needs. Alan

65 is the same as 67 Alan

The 67 number is 2277591, don't have the 73 book with me. Alan

You can see the hole for the strap, my 67 doesn't have that hole as they ran the hoses over the valve cover. Alan

From the 71 Plymouth Service Manual, for what it is worth. Alan

Holes in shroud are slotted for a reason. Alan

Glenn Ray doesn't just recore they restore them, here is the OEM radiator for my 67 273 Barracuda. Alan

That is a /6 shroud, the V8 one is 2785312, people have been know to make the work mounting them upside down. Alan

What is the number on the shroud? What is the radiator number? Thanks, Alan

Tell me how the heater core knows the difference, I have always on my 273 put the water pump to the outboard nipple and the intake hose to the inboard. My heater works just fine. Alan

I'm about definitive answers, I know the shroud fits, but am I sure it is the one I think it is? It took less time to remove it than I spent looking for numbers on the exposed side. Alan

The shroud does have elongated holes. Original 67 Radiator 68/69 shroud Fits perfectly, no forcing. Alan

I'll have to look again, I'm pretty sure my shroud is a 68 and my radiator is the factory original (tanks and frame) and the shroud fits with no issues. Alan

Maybe those cars needed the brackets offset so the radiator sat square? Alan

Are you sure a 69 had it? I know my 69 Polara didn't. Vendors will sell stuff like every car has them, not always true. Alan