Search results for query: *

Does this help. Ted

I would have to look up that print for it. If you want I look for them. As far as headers go I have wheel well headers so there is no problem there. Ted

Is there a boot that is used with a Lakewood Bell-housing. This is for a Big Block. Thanks in advanced..........Ted

Hey they had it. Thanks............Ted

I'm making one now and l need the length of it from pedal to the Z bar.This is for a Demon. Thank you..............Ted

Do you have the return spring on the fork? Ted

Your welcome. Let me know if you need other pictures. Ted

I think this will help. Ted

I'm kinda in the same boat here. I'm gathering up all the parts to put a 4 speed in my Demon with a big block. I've got the Lakewood bell and I've made all of the pieces that I needed for the clutch linkage. But I'm seeing that there is an issue with the starter. Right now I have a 130 tooth...

Here's a few shots of the one on my Demon. It's a factory 4 speed car so it should be in the correct location. I hope these help. Ted

Nice little tid-bit of info about the W. I have this ball stud bracket. Can anyone ID it? I think it's for an E body.

Gotta love it!!!! Ted

Have you ever seen these heim joint covers? JEGS Performance Products 64233, JEGS Rod End Seals | JEGS Performance Products

Here's a few shots of how I'm doing mine. It's not finished yet so I cant give you any input on how well it does or doesn't work. Ted

I need to know this also. Thanks...............Ted

Here's what I did on mine. I drilled 1/4" holes all around the perimeter of the hump. Then I welded through the hole like a rosette. You can see a couple of the welds up on top. Then I ground the welds down and used brush on seam sealer on both sides. The giant hole is for a V-Gate shifter...

I just saw an A body one at a swap meet this weekend. The asking price was $850. Ted

I was looking at my clutch pedal today and I was considering doing the modification in this article. http://www.hotrod.com/how-to/transmission-drivetrain/mopp-1012-four-speed-a-body-clutch-pedal-adjustment/ Then I sat down and took some measurements. Now I've heard of some A body pedals being...

I'm glad this helped you out Steve. Feel free to contact me any time. Ted

The Z bar is a 6 cyl one that I made to fit a big block but this is the spacer/adaptor that I made to line up the pivots. Ted

I had issues with my Z-Bar lining up also. I wound up making an adaptor to get it to be in the correct location. Here's a shot of it. I heard once that the Big Block Lakewood bells only worked properly on B bodies. I cant say if this is true or not. Ted

Here's mine in my Demon.

This might help you out a little. http://www.slantsix.org/articles/4-speeds/ODA833fourspeed1.htm http://www.bigblockdart.com/techpages/4sptech.shtml Ted

The big block Z bar is not the same as a small block one. Plus the ball stud bracket is big block specific also. The original bellhousings for '67 '68 '69 big block darts had a special mounting location for the ball stud bracket. If you look here in the 4 speed frum you'll see a post where I...

Here's a few shots of what I'm putting together. The floors on both sides are new and the tunell is from a doner. The hump is original from the car. As you can see I'm using a V-Gate. If that thing fits in there then any other shifter will fit as well. If you need more let me know. Ted

I'm just about ready to weld in my hump. I'll take some pictures and get some measurements for you tomorrow. How's that? Ted

One of the guys at work took your drawing and made a 3-d CAD print out of it. Same here. It was free and fun to make. Here are some shots of the adaptor bracket I had to make in order for the ball stud bracket to line up while using the Lakewood bell. Ted

Here it is mocked up on the car.

Well it's been a while since I started this but I'm just about finished with my Z bar. I used Rods measurements and just simplified it a bit. My intention is to put 2 mounting locations on the bottom for the push rod that goes to the fork. One will be in the stock location and another in the...

Rod thats perfect. Thanks so much! I realize that not all of the folks on line here have the facilities that are available to some of us such as lathes mills and welders. Thats where the the repro market comes in. For me,I have alot of fun millin' drillin' cuttin' & weldin' and making an...