Search results for query: *

Hello - Great video and thanks for putting it out. I have a 66 Barracuda, same frame rail issue on the driver side. 3 Questions. What kind of welder should I be using for a job of this nature, 2 Is AMD the best place to purchase the frame rail, 3 Where should I get the front-end frame...

Absolutely. I can finally make it to the shop as well!

Hello everyone - I had a little time over the weekend to adjust the caster. I moved the upper control arm out in the front, and moved the rear in as far as possible on both sides. I then centered the steering wheel, by strapping it to the brake pedal so that it would not move, and stay...

These are all great points from everyone. I will go through all of the recommendations everyone has given and hopefully I will get to a better point. I researched all of the parts that were purchased for the car, and they all were correct. I'll need to try and ensure the steering box is...

Hello FABO - I recently put front disc brakes on my 66 Barracuda. In the process, I replaced the front strut rod bushings(new), idler arm (new), lower and upper control arms(used), tie rod ends(new). It is a mixture of new and used parts. Prior to the replacement the car was drivable, but...

This may be elementary but make sure you check the direction in which you insert the ball joint. I just replaced the ball joints on both side of my 66 Barracuda and I inserted them one way, and they would not fit in the hole. I inserted them from the opposite direction and they went all the...

Hello FABO! I just received a K Frame today for my 66 Barracuda. IT has surface rust, which I plan on sanding down. My question is how should I go about painting it. Should I take it to the bare metal prime it and paint it. If so are there any recommendations on types of paint for the K...