Search results for query: *

I measured a stock set of 14's, 5x4, they are 13". I also have a set of 15x8 5x4 61's from wheel vintique, they measure 14". On both rims I measured the diameter at the mounting surface where the "Rallye" pattern welds to the rim, both are at 12".

I've read through a couple of old threats and the consensus is you can fit a 275/60/15, you may have to add a spacer to center the tire but doable without cutting or relocating. I' m looking at the Mickey Thompson ET street SS. The 275/60's state section width is 11.10" with a 9.29 tread. The...

Thanks everyone! what size bit did you use @mechanicmark

I picked up a set of SBP rims for my fast back, 15x8 with a 4.625 back spacing. I have about 1.5" between the spring and rim. Im trying to stuff the biggest set of mickeys i can under there 275/50r15. I may have to add a spacer. Has anyone changed out the studs to longer ones...which ones did...

those are big bolt pattern

Does wheel vintique make a 15x8 sbp 4.5" backspace? In a Rally?

Treblig, 3" bs? those are huge.

Thanks guys, huge help! Im running 3/8" clearance between the sidewall and the spring. One problem i've had with fender clearance was on the highway with a significant bump in the road, and in Cleveland there are plenty of them. Dave i appreciate the pics. seeing it work vs it will work on paper...

I'm curious how this turned out! I'm looking at doing the same....biggest i can fit without chopping anything up. Now trying to figure out backspacing. I want to go factory looking ralleys. Currently have L60-14's. I have sbp 8.75. I was thinking 15x8's.

I sent out 5 of my 14" sbp ralleys to be blasted and primed. turned out good i think. My centers are in good shape. Looking just to drive on these. As you can see in my avatar photo, fronts dont match the back. Currently the Fronts are 215/60/14 on phentons, backs are L60-14s. Those rims...