Search results for query: *

I think I have a set from a 67 Barracuda that I'll give you. Let me know and I'll check the garage tonight. Scott

Put the engine today. Lots of clearance to the battery. You may be able to use the stock Jeep Grand Cherokee reservoir but it would be pretty close.

Good point! I doubt that higher pressure would blow a seal, but it will make steering effort lighter or heavier. I should be able to tweak the control valve if this is a problem (I know it's possible on the Saginaw pumps but haven't seen anything about this specific pump). Scott

The Magnum serpentine setup requires a specific timing cover and reverse rotation water pump. I'm not sure if all of that would bolt to a 273... I'm putting the engine in tomorrow and will take pics of the clearance to the battery. FYI - just learned that late 90's Jeep Wrangler 4-cyls...

It wouldn't be too hard starting with 1/4" steel plate, then welding on additional 1/4" blocks to space out the pump mounting points. Here's a pic of the billet piece for sale online for approx $70.

Just wanted to share this info for those using the original Magnum serpentine setup on their cars... As you probably know, the stock Magnum truck PS pump sticks out a mile and hits the battery tray. I have heard about using the PS bracket from a van that brings the pump closer to the...

Cameron, if money is an issue you can make your sway bar tabs for almost free with a scrap piece of 2x3 square tubing. Cut it at an angle and trim it to clear the flanges on the LCA. Kinda hard to describe but I can send you pics of mine if you like. As redfish mentioned you can also weld...