Search results for query: *

So in this class,that it,s is supposed to be a muscle car,which makes me believe it,s a street able car,that could possibly run mid 7.s as a street car,any thing wrong with this picture,mrmopartech

The nhra does not allow canadian mopar owners to vote,due to our postal codes,mrmopartech

Well this was the last weekend here in montreal for racing due to temps here and we final got the front engine dragster running consistent 8.65@155 with four runs within 4 thousands.With the way started off at,and way it ran at first(9.85+) it was a great season with the progress and tuning we...

Getting ready to install the alcohol motor and set up the fuel system.I have been buzy setting up the new trailer for the dragster,making shelves,winch,lighting,etc.With spring cleaning going on now and trying to do motors,tranny,s and cars,there is so much spare time to work on the digger,since...

Find a good 1/4 track and have some real fun,mrmopartech montreal quebec canada

Retro,that,s a cool digger,very simular to my buddy,s front engine chevy digger.What type of times is it doing?mrmopartech

This weekend,I am finishing the trans cooler bracket,shifter mount,cut cooling holes in the bell housing,mounting the MSD 7al-3,do some wiring,some maching on the the wing spars and sheet metal.I am looking for some side scoops for the radiator.The frame has two big triangle shape support bars...

This is a oil deflection sheild or a oil heat sheild for the intake.It can be made at home from sheet metal just like a intake gasket like the 383/440,but his one sits in the lifter valley to stops the oil that is slashing around from hitting the bottom of the intake and heating the intake and...

Bob,I will be at your house on the weekend to take the motor out,and install it in the digger,scott/mrmopartech

With me and my buddy Bobby Joseph from dallas georgia with his allcy expeirence,we are going for 8-900HP,which should run mid 7,s.As a friend of his has the same set up and is going 7.30@192,mrmopartech

For the last month and a half I have been working on the newest toy for the family.This 225inch digger is going to be powerd by a alcohol burning 452 as a starting engine with a ron,s toilet system,and see how that goes before installing the 512 motor on alcy.Installing new tires front and...

I check them all,if time is allowed to make sure I am getting proper fuel distribution to all cylinders,mrmopartech

Learn to pedal the car and chassis tune,mrmopartech

We manged to bag 3 wally,s back in the day with the super stocker,and have not got one since.Takes big time money and time and allot of mid night wrenching,mrmopartech

Since we do not know what you had done to the motor,it,s hard to say.A refference is a 451 I did for a buddy,after every machining thing you can do,parts and labour,you looking at 6500$.Just machining,assembly and balancing and what ever shop cost there are,2000-2500$.As for machining,you need...

It seems to me that allot of drivers and teams will say any thing and do any thing and get down on there knees and just about ***** them self,s to get a sponsor or a ride.They will say how great this company is,no matter what the product is just to get there money and run the team for the year...

First install a fuel guage on the cowl to watch the fuel pressure as you drive and adjust it and check the pump for loose wires or bad connections.Disconnect the shift light and re-try,then check all the dials for the MSD and at the end swap for another unit. MSD do no like low voltage under 12...

Re-jet the carb up 5 numbers and check the new plugs after a 3 runs,and post how many threads on the plug are dry,mrmopartech

Have you adjusted the push rod length to stop the master cylinder from being on? if nothing has changed on the brake system,and the only change is the master,either the master has a problem or its partially on and dragging the brakes.A simple solution is to add flat washers behind the master to...

If a leak down test shows more than 10% leakage,then freshen it up,mrmopartech

I would get it down to 12-14 lbs and see if times get better or worse,this is a trial&error to see what works best,mrmopartech

Give me the shift points,weight,gears,tire diameter,etc and I will pin it done to a 1-2 tenths,MMT

BJR racing for sure,mrmopartech 1-770-443-8874

What are the rpm specs for this cam,mrmopartech

call 1-770-443-8874,ask for bobby joseph to find out what you need,mrmopartech

To mr.V273,congrats on the record and hope you get more records and faster every weekend,and the same to any of the Stock or Super stock racers here on this forum.My heart is with the 2 stock classes as a ex racer,the true builders and thinkers of the sport.If a 273 valiant can run close to mid...

Instant Center: Am imaginary piont determinded as the center of a radius made by a moving suspension component,that is a point of lift,mrmopartech

Depending on head volume&gasket determine the C/R.This is a list of what the ratio can be with different head volumes. Compression Ratios 72-11.5 80-10.6 85-10.2 90-9.7 You will land up most likely with a 10.4:1 ratio as a good starting piont.get the specs and see if you will reface the...

Is it a .030 over bore or more,what is the deck hieght of the motor now and the pin height of the new pistons,and what head gasket will you use,steel or compasion type,and the new pistons,how many vavle releifs in them.Mrmopartech

Pro,s and con,s. twice as many runs can be made more action for the fans less staging lane screw up and long lines oil downs cause only 1 lane to be shut down,3 can still race,or 2 Danger increases 300%,if a car gets totally out of control,3 cars get toasted,instead of 1 3 cars...