Search results for query: *

Ask for Armando

LH23B6,column shifted auto

I'm going to take a look at one on Monday or Tuesday....parts only

Any pics of the fender tag?

I found new covers here,bought new foam during xmas at 1/2 off and the shop near me said $150 to install my parts but I forgot to ask if that's for one or both. There a few good things about Chicago

barely room for a small block

If you have a sedan you need one for a sedan. The ht cars have different glass.

Restoration Specialties

Try Restoration Specialties?

Does your air cleaner have a dropped base? The one I have lowers the filter 2 inches or so

I have a nice used one but I'm sure shipping would kill it.

I am wondering if the shark fin antenna's from the newer cars will work and I think they are regular antenna's. I have been meaning to experiment for my other car that is radio delete.

I do and PM on the way.

I have what you need for pullies and brackets $75 + ship,add 3% for PP

Did you get your kit from Detroit Muscle? His kits are pretty complete.

It should be the same color as the seats and door panels.

If you didn't narrow it then you will have to use newer mustang or equivelant wheels with lots of backspacing. I think some have been using the 17x9 on the rear.

I don't see why you couldn't use the gasket to mark where the holes are and just drill the holes.

Yes,it can leak as bad as the dipstick tube seal if the seal is real bad.

It's worth that but not much more

318 or 360? There is a specific factory 360 pan # that works for early A but don't remember the number.

What is PC-7?

Oh and wait until you ask for advice on something or are selling something. It's like watching a monkey f**k a basketball.

What are the green and red buttons for on the left side of the dash?

65 and earlier is smaller. Do a site search for early a body 4 spd console and you should find pics

No,they are different. It may be possible to "make it fit" by getting all of the console brackets for 66-up and the shifter handle for 66-7 too. Don't quote me on that though

Yes,start at the end/corner and slowly work it off. Be ready for it to pop off when you reach near the end.

I would love to see that build.

I used a bottle opener,pick,wire brush and whatever else I could find to work. The channel seems have been lead sealed so wear a mask if your kicking up any powder. I have a 2 sided bottle opener that has a bird beak on one side and blunt on the other. The blunt end is what you use to remove...

They make a few different sizes. I'm guessing your radiator is similar to my 67 and it uses an 18" fan....if I remember right. I know 20 is too big if your using the factory shroud.