Search results for query: *

Another great tutorial! Sticky? Prease?!?

What?

AMEN! Needs to be stickied for sure. Great write up and info, especially for the new Mopar converts!

http://www.aamidwest.com/enginequest/eq-cylinder-heads/chrysler-magnum-head/ http://www.hughesengines.com/Index/products.php?browse=category&level0=Qi0gU21hbGwgQmxvY2sgRG9kZ2UgTWFnbnVt&level1=Q3lsaW5kZXIgSGVhZHM=&level2=SXJvbg==&level3=SXJvbiB3LyAiTEEiIFN0eWxlIEludGFrZQ==&partid=24235...

Check out LXGuy's website http://www.magnumswap.com/ hit the magnum swaps section http://www.forabodiesonly.com/mopar/forumdisplay.php?f=131 As per Magnumswap Website: "Oil Pan To install a Magnum motor in your car, you will need a car-style mid sump oil pan and matching pickup tube. All...

Yep, as far as the Cables are concerned....not sure on the bracket....i went with the one piece unit.TCB-40DQ. But mine is on an AFB at the moment. http://www.summitracing.com/parts/lok-tcb-40dq/overview/

"http://www.magnumswap.com/ THE place to go for the in/outs and what worked for LXGuy! http://www.forabodiesonly.com/mopar/forumdisplay.php?f=131 Sub forum opened up roughly a month or so ago just for the magnums!"

Like Abodybomber said: http://www.magnumswap.com/ THE place to go for the in/outs and what worked for LXGuy! http://www.forabodiesonly.com/mopar/forumdisplay.php?f=131 Sub forum opened up roughly a month or so ago just for the magnums!

^ this, I only found last months(Aug 2014) issue locally, I wanted to see the rest of the series, but nobody in the area has them. Was hoping somebody could scan/share the article about the head(EQ), and cam selections in the previous issues.

Edelbrock LD4B/Weiand Stealth http://www.forabodiesonly.com/mopar/search.php?searchid=8079033 http://www.forabodiesonly.com/mopar/showthread.php?t=264369&highlight=ld4b http://www.forabodiesonly.com/mopar/showthread.php?t=264185&highlight=ld4b etc etc

.430/.450 or there abouts, and like Bad Sport said, timing chain and maybe the tensioner front cam plate for added insurance http://www.summitracing.com/parts/dcc-4452759ac/overview/make/dodge

Real men paint things Mangenta! But for real, Hemi orange is popular......obviously! just look at some of MRL engines: http://www.forabodiesonly.com/mopar/showthread.php?t=261967 look pretty damn good!

I choose the ones that are not cracked, or have been fully checked! Foregoing that..Engine Quest! :D

Need the car mounts/brackets like Poison said.

compression = 1969 engine is better so.....

um...they happen to be STROKER pistons ment for a 4" stroke crank....if not well.... http://www.forabodiesonly.com/mopar/search.php?searchid=7961840

Crosswind,....do a search on here and see what people have said about em.

^ got one on my Duster atm from a buddy that was building a 273 for his 27' dodge roadster pick up project. http://www.forabodiesonly.com/mopar/showthread.php?t=101967 http://www.forabodiesonly.com/mopar/showthread.php?t=158050 some searching turn up info here, and Moparts for more...

Like others have allready stated, Contact Trailbeast, or swing by his site. http://classichei.com/ Ill be doing this very soon as well,albeit to the chagrin of my mopar mentors..lol

as per your previous thread http://www.forabodiesonly.com/mopar/showthread.php?t=243970 I liked my P4452759 Purple shaft in a similar low budget 318 - Mopar Performance -P4452759 Purple Shaft Cam & Lifter Kit Fits: 273/318/340/360 Adv. Duration: 260°/268° Dur. @ .050'': 221°/228° Lift...

MRL Performance just posted a good pic of a forged crank in the "Mopar Mechanical Parts For Sale"! Might give you a clearer pic to ID/compare with just in case. http://www.forabodiesonly.com/mopar/showthread.php?t=200307

Like 73 RD said, check the date code for the block: "The crankshaft was switched from forged to cast somewhere in the production cycle, believed to be in early April 1972, with engine 39118000 (thanks, Karl Thomas); a milder camshaft was used." Still does not mean at some point a P.O...

rod: 6.123 crank: cast=external balance(flywheel/converter/harmonic=weighted) 1968-1971: forged crank, part number 2532457, 2128869, or 2843868; service part number, 2843868 1972-73: cast crank, 3462387, 3658393, or 3751841 (some 1974-86 cast cranks use the same 3462387 casting number as...

I would hope in 7 years he had built it by now or moved onto another choice of motivation for his vehicle. Might want to try the actual classified area for your AD!

http://en.wikipedia.org/wiki/Hypereutectic_piston "A hypereutectic piston is an internal combustion engine piston cast using a hypereutectic alloy–that is, a metallic alloy which has a composition beyond the eutectic point. Hypereutectic pistons are made of an aluminum alloy which has much...

How many tweeners' are going to be driving a $96k+ import?If they are, Iam willing to bet the local law enforcement would like to search their person and vehicle.Hondas,Subarus,Supras,Fairlady/350 and the like Iam sure is what was ment by the OP.

yep,here is a link to it for a look see. http://www.summitracing.com/parts/EDL-1481/