Search results for query: *

Thanks, I did remember to print off a tech sheet and that tells a lot.

Looking for a recommendations on applying this dash paint. I've done it before with help from a half experienced painter and it turned out well. Ill be prepping the dash in my 72 demon for this paint and want to make sure I use the correct materials. First, what do I use for a primer under the...

Thanks for the picture, that explains it! What do I have?? some how I've ended up with two of them both with the same sized hole. looks like I need to start looking again

I'm starting the Demon dash restoration and don't seem to have the correct parts for the heater controls. The car started life with air conditioning and is getting converted to non air. I have found the non air dash frame and woodgrain bezel, but seem to be missing the correct controls. The...

I struggled trying to get you some measurments, holding the camera with one hand and the tape in the other. This is the driver side. I doubt these will help much, but you never know.

here is what i could find, if you need some measurements let me know or some other pics

take the emblem out of the center and remove the bolt

still run the stock wheel, but took off the column shift for a hurst quarter stick.

i did mine with the back glass in and it was tough. you would be better off pulling them out to get a good fit. mine turned out fair at best