Search results for query: *

I like the 742 with the shims and big bearing, when I have a 489 set up I have the crush sleeve eliminator installed. If you ever have to replace a seal or you are changing your yoke for some reason all you have to do is retorque to specs and your good to go. Webby.

I think like 1980 they went to the lower first and second gear, depending on your rear ratio if you put the 727 in the car it could be a lot slower at take off, if you have your trans converted to a non lock up make sure you keep the lower gear set in the 904. My car ended up with 2.94 gears and...

The Mopar Dude steel wheels different width custom off set NO EXTRA CHARGE. Google Mopar Dude index on left side hit on wheels. Good Luck Webby.

I'm looking for a 8/ 3/4 housing in the junk yard.....he has a big pile.....there all mixed up.....mopar-ford-gm.....hey i see a very wide housing with the 11" finned drums.....the perches have huge holes in them probably a good 1" hole maybe bigger.....what year did they start making those...

Question on the axles.....i'm having a 8 3/4 cut down and i'm going to use the 4 1/2 bolt pattern.....i've always been told the c-body cars had the correct axles.....but not all of the c-body cars.....just some of them.....is there a way that i can tell.....the guy at the junk yard doesn't want...

What cars did the 11 3/4 disc come on and what all do i need to put them on a 1973 - 1976 a-body k-frame, i think there are two different kinds and which set up is the better one to get. Thanks webby.

What would the price be for the installation kit.....are you hooked up to the original mechanical cable or to some type of electronics is it accurate.....thanks webby.

Is the shifter located about where the stock shifter would be located in a a-body 4 speed car.....which pistol grip did you use.....i was wondering about the use of a console.....the shifter looks like it is centered in the floor which would make it easier.....thanks eugene.

What blowproof bellhousing did you use.....hyd or manual linkage.....are the headers and x pipe tti.....when you finished the sheet metal did the carpet fit it or was it to small.....thanks webby.