Search results for query: *

very carefully

run the shortest cable possible and the least mount of bends....obviously no hard bends.....lube cable

yes, i think it would look good in that interior also, if it fits for you

interesting

yes

yeah you have to drop the column on a 72 dart or the instrument cluster will crack at the bottom trying to get it out.....ask me how I know

over

save the money....Just take your upholstery to the shop....they will use their own stuff....That is more if you want to do it yourself

X2...herb's

yes, i think its 1/8 NPT

Yes, he is correct...If those other two hidden VIN numbers come back as stolen, guess what???

yes, he is correct...I would check the other 2 VIN locations to see if they match the VIN plate on the dash.....I bet they don't...which can get you in trouble and get the car confiscated......one is on the radiator support and the other one is on the trunk rail edge lip underneath......and if...

That first 4 digits check out OK...the 5th looks like an H which would be a 340.....6th digit in VIN on dash looks like a 1 to me which would be a 1971 not 1972...This would throw up a red flag for me! Everything on the car as far as grill, fenders, scoop, etc. is 1972......It has the original...

no, they are not

adhesive...I used 3m spray adhesive

The superglue or locktite will work but if you ever have to adjust your mirror, you will break the glue and have to do it again...Do it right.....take it off....there is a piece of spring steel that keeps pressure against the ball socket......tighten the screw (if loose)....or if ball is worn a...

It is easier if you take the cluster out but it can be done with a straight nut driver and some contortionist moves....it is easier to do it at age 20 then 50.....ask me how I know

Is it repro or NOS? here is a repro PG Classic 331-70 Mopar 1969-71A-body Diecast Woodgrain 4Speed Console Top Plate | eBay NOS would be worth more

I am not sure what else you are looking for?? You said it all here "Never been used as no nuts have been screwed on to it. it's for a 4 speed(standard) and 69 up A-body. part#2877234 94200 RH1" Are you looking for a value?

194 bulb number....you need 8 to replace them all Mopar 5/8" Dash Light Sockets & 194 Bulbs- Qty.10 Sockets & 10 Bulbs-#009B | eBay

try Legendary Auto Interiors - The Interior Specialists Since 1985

good point! However it is nice to see the reaction on their faces in your rear view mirror when you blow their doors off

super glue works if you set it and don't move it...Also, if you put a piece of paper towel under the spring steel it will tighten it up.....However, if you take the piece of spring steel off of it and bend it so there is more pressure on the ball it will be fixed the right way

I used the green paint to dye a black dash pad green and it worked great.....Best way to describe it is, it sprays and goes on like regular spray paint, but penetrates and colors like a dye

screws down with three screws through the holes in pic

Or a driving stimulator in Karl's case

pop the center out...there is a nut under there to take off....shaft and wheel are splined.....26 I believe...1 master spline

The first pic almost looks like they would be the bezels for the post on the sunvisors....and a guitar pick...LOL

Yes, usually you can find some for sale here....It would really be the easy way to go

Buy the brackets