Search results for query: *

  1. C

    i needa cam expert

    You want to put a cam in the engine, cool, what are your rear gears, and tire size, so you know the RPM range the engine will be in. If your going to use a car for racing the cam to use, will be larger, than if your going to street drive it. Lots of stuff to consider to make a wise...
  3. C

    273 to 318

    no, but you can use the 273 valve covers and timing chain cover/ water pump to make the 318 look like a 273. ;)
  4. C

    Oil Return Mods for HP Gains on Small Block

    What are you going to use the engine for? NHRA type drag racing, towing a heavy trailer, snow plow/work truck?? A windage tray is all you really need, the factory oiling is pretty good, Milodon makes one too. Perhaps a Mellings oil pump would be a good idea. I suggest using the Mopar...
  5. C

    318 cam selection

    I used the Mopar .430/.450 lift cam. I bought the springs Mopar suggested too. 318 engine 302 heads stock valves Dual exhaust :) http://www.youtube.com/watch?v=Ud8mci4rjFU
  6. C

    New carb for a 273...

    500-550 cfm for a 273 would work better. http://store.summitracing.com/partdetail.asp?autofilter=1&part=EDL%2D1403&N=700+115&autoview=sku Part Number: EDL-1403 Number of Barrels: 4 Carburetor Flange: Square bore Choke: Electric Fuel: Gasoline Secondary Type: Air valve New or...
  8. C

    318 build. what would you do?

    For my 318 I used Dual exhaust off the stock manifolds, #302 heads, Edelbrock LD4B intake, {Small ports made for the 273/ 318} Edelbrock # 1406 Carb, Mopar Performance Cam/Lifter set P4452759 Part Number: DCC-4452759 Cam Style: Hydraulic flat tappet Basic Operating RPM Range...
  9. C

    intake advise ?

    Throttle linkage is different for 2 bbl, and 4bbl, so If your converting,from 2 bbl; don't forget that too. ;)
  10. C

    How much cam with 9.0 compression?

    email or call Comp Cams. http://compcams.com/ CAM HELP® Phone Number: 1-800-999-0853 http://compcams.com/Information/CamForm/camform.asp
  11. C

    Maximum rpm for SB

    rpm? eleventy billion, sounds familiar?? LOL< depends on cam, valve springs, and crank,{forged/cast} as well as the quality of the balance,of the engines rebuild; and the crank dampener/harmonic balancer. 5,500-6,200 I would say is the normal "street" limit. The more cid,the...
  12. C

    Maximum rpm for SB

    eleventy billion??? Nahh. You want high revs? Go talk to Kyle Petty, etc. ask what they do for the Coca Cola 600 race. If you have not put 4.10's in the car yet, i suggest 3.73 as a compromise. :) Which cam do you plan on using?
  14. C

    Small block intake manifolds...

    http://www.compcams.com/Community/Articles/Details.asp?ID=-360770234
  15. C

    bah, can't trust anyone these days

    What is in the car now? Points? Your car will run better. If your steet driving the car, the plugs will burn hotter, and burn the fuel more efficiently. In 1971 Mopar started to use Electronic Ignition, in some of the high performance engine'd cars. :thumblef: By 1973 as far...
  16. C

    headers or not to headers

    I think a good dual exhaust off the stock manifolds, is very fine for a street car. TTI headers are about $700.00. aprox 15 hp over dual exhaust is not worth that to me. http://moparmusclemagazine.com/techarticles/155_0307_exhaust/
  17. C

    Man at the smoke

    yep start with oil and filter change, drive it for about 75 miles,and change the oil & filter again. Use Non- synthetic oil, to start.
  18. C

    360=500hp

    MOPAR Performance new 440 (439.1 CID actually) small > block. > Bore:4.180", stroke: 4", Red line 6,000 RPM. > Aluminum > large port Commando heads use W2 style shaft > Rockers. > Rotating assembly is all forged. 500-525 Hp/535 LbFt > on > pump gas.
  20. C

    what do i got to do to make 500whp?

    http://www.smoke-n-thunder.com/car/ Specifications Engine Westinghouse J34-48. Originally used in the North American Buckeye T-2A aircraft. Horsepower 10,000 Thrust 6,000 pounds with afterburner
Back
Top