Search results for query: *

This fits the 63 to 65 with factory bucket seats... 66 A Bodies take one " Sightly wider " for the newer clam shell Buckets .... Mine just fits snug between the seats... no bolts needed ! I am totally pleased ... finally more storage then the tiny hard to reach glove box... and a place to...

My 65 B-cuda... 4 speed.. 3:55 sure grip 8-3/4... Updated to Slip Yoke & 10.5 clutch/pressure plate/bell housing w/braced firewall... and a few other things maybe Love the 4 speed... always have! Even at 77, I still slam gears! Note my last photo is my " Other " car... An 09 Challenger SRT, I'm...

Yeah, I could more easily make a stamp die... and make them... just find some sheet rubber of correct thickness that would stretch over the Center Lock. 2 inch od, 3/4 id, .050 thick (maybe a little thicker) Way better then old brittle half century plus factory originals! Good idea cudamark !

My " Original" 65 B-cuda Gas Cap got a brittle seal and cracked... I put in a needle in it to show the Crack as you don't see it otherwise... so check yours closely!!! (If you use this type) My 2nd cap ( made by Stant I believe ) was much better with thicker/ softer gasket... My fall back cap...

My solution was to goto the 1967 Flip Top Gas Cap... It has a nice heavy spring on the cap, holding it "tight" onto a piece of Delrin I machined with a Rounded sealing surface ! And on the back side there is a large O ring around the factory fuel neck that seals to the Delrin adapter + 2 more...

This is how I did it oh so many years ago... Posting this "Option" ... I wanted to hide my proportion valve...

Uh, did not Realize... so I deleted a bunch of them! Clif of Az

273 64 - 66 A- body Lower hose using stock water pump that goes to the drivers side... Gates 20386 Not that long ago I needed one and found it local !

Duh, in my picture... those screws are "spares"... of course I will take care of you on this... PM me with your address... Meanwhile I will try to find a small mailer bag...

You're Most WELCOME :)

These are real original tail light lenses screws I have removed from numerous 64/65 Valiant/Barracudas ... and my taillight !!! Does this answer your Question ? Or am I misunderstanding you, my OLD Friend ? ( because these do not even come close to your description! )

Uh, Mr 65 Cuda 340, My center Body Grill " is " now Body Color ... pishta photo of my car was from years ago when I wanted to be "different" ... till every one here in Phoenix copied me and painted theirs Black... is when I corrected mine Back to Body color several years ago !!! Besides, I...

Probably a different part # because in 66 they changed the Key Lock Cylinders in the doors/ trunk access... ?? So the Hole in the panel is slightly different ? Best to find a 66 Valiant / `cuda... but if you can't, don't overlook the 65 model year for that panel...

The 66 is the same panel used on the 65 Barracuda... and used on all 65 Valiants except the Valiant Station Wagon... Mopar part number 2422 006.. see photo below of Mopar Dealer parts catalog... so I'm pretty sure that it would apply with the 66 model year...Hope this helps you..

That is an OER #MA2235S 65 A- Body Alum Radiator for "manual shift" bought from Classic Industries a number of Years Ago... has worked perfect for me here in the Arizona Desert... (updated photo just took 6-22-2021)

This is what my 65 "S" had (originally)... but when I redid the trunk divider flap I made it like a 64 parts car I once had with the extention over the passenger side rear wheel well, and as Pishta said "it Also makes a nice STASH area " (I like that & hide things back there when I do Open...

ah, toolmanmike's pictures show that the one in message #9 is for a 70' mopar... the 66 and earlier had a stubby neck! Now that I see the side view! I Stand corrected .... the ones in My pictures ( post #13 ) are for 63 to 66, and were Used on my 65 as they have the Stubby neck ! I Learn...

The one George Jets suggested (msg #9) looks correct... (whoops, see my post #15) The ones I picture were used on my 65 Barracuda and the handle was parallel with the ground when tightened!

Okay, Sorry... I was not aware it was just a picture you copied... LoL I being very Retired... can't come up with the 40 bucks either.. Have an Awesome day...

? Huh... Why? A fellow FABO & Gold Member is looking for Help!

Sold out on that last run... maybe after this covid thing becomes history, I " May " make another run of the Round 64/65 A body Shifter Rings... Sorry

Right there by the lower trunk latch...It pops open the trunk when you put in and turn the key!

In My 65 Barracuda, I have removed the Gas Tank after pumping out the fuel and... Removed the Rear Shock Absobers for the needed Wiggle room... I did this all by myself ... to replace the filler tube grommet!!! I dreaded doing it at first, but did not find it that difficult in the end... me...

Hey 65 Cuda 340... Thanks for this info on these laminated Color Wiring Diagrams... I just now ordered 3 of them. One for my friends 66 cuda... one for another friends 66 Dodge Charger... and One for Me and my 65 `cuda !!! My Shop manual is very old & getting difficult to read.. and not in color...

I USE THE Edelbrock D4B dual plane plane intake manifold and the 273 commando factory recommended filter size and i even have a 1/4 spacer between AVS2 650 CFM carb airhorn and air cleaner base... yes, it is close, but does NOT touch even when I am laying hard into the throttle slamming gears...

My 65 Cuda... being a machinist I made my own adapter.. using black Delrin (high strength plastic)

Well, just pulled the ones I Never Use that came with the car.... and this is what I got... Remember, I'm the 2nd owner ... getting it in 1974 from the 1st owner... And quite frankly... I don't care... they Work!!!! I use these as masters only... :) A set of keys is Two.. and you get 2 sets...

Hmm, my 65 Barracuda did not have the C.A. P. Package... and was built in California for Dealership Sale in Arizona... And I have Driven it into California many times and Never got turned around because I did "NOT" Have C.A.P. !!!( So they could be Driven there ) Only Vehicles (back then) that...

Hey Grimreaper... I have Never seen "quarter" (1/4) inch Masonite, only 1/8 th !!! Your photos do look like Masonite... let me see a "Edge" photo of the one you show with a close-up and your tape measure over it... please... the one I show is what came in a 65 Barracuda Formula S.... With the...