Search results for query: *

I second that radiator to hood dam rubber strip. It made a big difference for me.You really need to have that.

when does it get hot. do you have a fan shroud. hood to radiator rubber. those two are must have items.

I have one on my car it worked good

hear is the number for the shorter clutch. Hayden 2765. I recommend rock auto

bought a radiator from challenger gary. it looks grate and fits good.grate price also.

thanks

still looking

Its time for me to make the plunge. I thought there was a dealer hear. need one for a 69 barracuda sb 70+ water pump 4-- hp. talk to me. thanks

3000 IS 65 mph

I just put on a smaller pump pulley and it helped e little. i just ran 70mph for 10mi in 80 degree temp and it went up to 200. timing is 35 total. hose has the spring and temp gauge is accurate. radiator went to shop for flushing and they said nothing wrong with it. spark plugs look the right...

U guys gave me good stuff to work on thanks. i will post results

That clutch is the standard thermal clutch just 1half inch shorter than stock mopar for clearance issues

30 over

7 Blade steel fan with jaguar thermal clutch and yes i have a shroud and good stock standard water pump

The faster i go the hotter it gets. i have a 3 core 22inch copper replacement radiator in exultant shape fan shroud rubber air dam on hood and 340 engine half filled with hard block.I am told my radiator is adiquit but its still heating up on hot days over 60mph. would a high volume pump help. I...

thanks thats what i will do

whats the good pully size ratio between the water pump and crank for a near stocksmall block, i am thinking 1-1. my car starts to creep up over 70mph on hot days. its got a decent 3 core radiator hood to radiator seal and fan shroud. i noticed my water pump pully is almost one inch bigger than...

got the hayden 2765. sumit had it in stock. works grate. thanks guys

that will work thanks

just checked and the 2705 one is stock mopar length. there is still a shorter thermel one out their.that one is to long for my car.

thanks again

i remember hearing about a mercaites Benz clutch fan that is a little shorter then the mopar one. intended use is a body small block. anybody know the part number, i would appreciat it thanks

Hi im putting together a car with a 430hp 340 and am wondering if the right hand suction system would be adequit.i have a high volume left hand side pump but don't see them for the right side. My problem is i have the pullies for the right side but not the left.Is it worth the efort to go left side

three things you must have hood seal shroud and good fan. unless you want to start cutting up your car a 22 inch radiator is all that fits and the same shroud should fit them all. now its up to you to make decisions.

two important things. fan shroud and the rubber strip that seals the hood to the coor support so the air goes through the radiator instead of over top.

im just thinking outloud, could use a manuel choke nob for third cable.

by the way my heater box came out with the fan atached to it

hi i dont think i am the best person to advise you for this job. all i know for shure is the box would not come out in one piece. after seperating the two halves it came right out. i also took the nuts of all the studs in the moter compartment that were in the area of the heater box. i think i...

i have to go to work right now i have one apart right now but i dont remember all the details. after work tonite ill go check the parts and give you more details.

the ac boxes are in two pieces held together in the center with one bolt. it wont come out in one piece. seperate them and it will make it mutch easier.