Search results for query: *

Yes. The frames are a little different than a 69 Dart, but closer than a high back seat that would come out of a Scamp.

Possibly. What year Scamp? The tracks may be a little different. A console would be pretty much the same. Do you get down into the states very often?

Push down, sometimes pretty hard, push back while still pushing down. Once it slides back, lift up on the front of the bottom, and then pull forward. The back may be held in by a couple of bolts down low, or some bent metal through some "hoops". It depends on the year.

Wow. Now make me one. That looks really nice.

The upper is the same, the lower is different. The lower back seat frame on the Dart is taller. I found out when I tried to put Demon seat covers on a 70 Swinger back seat.

The seats, in general are the same. The mounting brackets are different. You can make them work, but they won't be a simple bolt-in.

They look a lot like 71 Duster/Demon. What do the tracks measure, stud-to-stud?

All I had were front seats. I don't know what the rears looked like. Is this what you're looking for?

I'm pretty sure I have a pair of medallions. I'll have to see if I can dig them out tomorrow.

What are the distances you measure between the studs, front to back, and side to side?

You might call DashMat and see if they can do green. This company shows green as an option. http://dashcoversaz.com/index.htm

Dante sells Legendary. And new carpets will most likely need to be trimmed, no matter the source.

Check with Dante. He can get you Legendary stuff, usually at a bit better price. http://www.dantesparts.com/

I was going to recommend Dante, too. http://www.dantesparts.com/

You never know when you'll need to light two cigars at the same time. The car should have both. And the radio is correct, and like 66 said, someone cut it to add an aftermarket radio, and then put the stock radio back later.

I haven't seen one after 71. Did some 72 cars get them?

On the lower part, push down, and back. When it slides back, keep pushing back, but lift up on the front of that seat. Once it pops loose from the bracket, pull it forward. Sometimes it's easier to get out if you remove the armrests. As far as the back goes, down at the bottom of both sides...

Pull. Hard.

The 69 I used to own was black and white inside. Black headliner, dash, carpet, and upper door pieces. The seats and door panels were white. It was factory this way.

I have used a set of their upholstery. Not the same quality as Legendary. It was quick and cheap, and in a color not offered by Legendary. I wouldn't use them on a show car or anything, or expect them to last a long time. Also, good luck getting any customer service if you have a problem.

I've done this a couple of times myself, and the dimples in the floor should line up with the stock A Body brackets. Some people try to reuse the two holes on each side that the bench seat used, which is wrong. Right in the middle of the floor pan, there should be four dimples that should line...

Where did you guys pick up your Grant Tuff Wheels? I see Mancini sells them for around $100. Do they just use a regular Grant installation kit, or do you need an extension collar? Thanks.

Like this? This is what I have available here at work.

Back in 88 when I bought my first 70 Swinger, I couldn't get them out until I folded each seat forward and hit the headrest from "below" with a 2x4. It didn't damage mine, but I can't guarantee your success.

I just went through trying to put 71 Demon/Duster covers on a Dart Swinger set of seats. The top is the same, but the bottom is different. The Dart has more headroom, so the seat is taller.

Are the bucket seat tracks on a 64 Dart the same as used in 67+? There is a guy locally selling some 64 Dart bucket seats and I was wondering if they would work on the later seats. Anyone know? Thanks.

Actually, I called and talked to someone this morning and he is going to send me a sample of the 340 blue vinyl. Do you think that you should send more samples for me to compare? I'll PM you my address.

I'm not sure who really manufactured the covers. I got them from http://www.pgclassic.com/ . The auction link is http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&&item=120287675089 . If you click on the color choices, I got the 340 blue. I'm not sure if it's the same as the 340 blue...

Hey, thanks, Crazy Dave. That describes exactly what I am experiencing. You da man.

Actually, I have a 70 Dart and 71 Demon/Duster covers. They fit everything well, except the lower rear. But the information you gave me answers the question. Thanks. So, for those who have put Duster seats in a Dart, how poorly did they fit? I'm leaning toward getting a couple of yards of...