Search results for query: *

Yes, I have a long tailshaft A833OD from a D100 pickup in my 68 Barracuda. I had to fabricate an adapter plate that bolts to the rear mount and positions the shifter forward to the stock A-body location (bigblockdart.com has a drawing for it). I also had to shortened the drive shaft about 3". On...

As previously stated you need to market these to some one restoring a T/A or AAR car. The price you are asking you can get from that crowd or maybe even more. For someone looking for heads for a non T/A AAR car, RHS heads new cost your asking price and flow better.

FWIW, if they are P/N 78050 (uncoated) or P/N 78056 they will fit a floor shifted manual tranny just fine and work with either power or manual steering. I have them in my 68 Barracuda.

That ebay add is no bargain. You can get a Cardone rebuilt MC form Advanced Auto for $20. My experience with Cardone remanufactured MCs has been good. The original drum brake MC on my Barracuda was replaced in 00 with one. I used it until 03 when I swapped in disk brakes and picked up a...

They should be arriving at my house today and they look like the uncoated Hedmans that I currently have in the car.

You never mentioned what it is for, sb, bb, hemi!

I will take them for 50.

No it won't! The steering box has a large sector shaft that requires you to use the 73+ pitman arm. This pitman arm mounts down from above into the center link verse the 72 down coming up from the bottom. This would require you to use the 73+ center link and idler arm too. The problem is the...

You never know with ma mopar. .810" is \6 .850" is heavy duty \6 and light duty sb v8 (318) .870" is heavy duty sb v8 .890" is bb block.

FWIW, .81" diameter is the /6 bar.

Sold!! :)

I just ran across a Direct Connection \6 Windage Tray P/N P3690274 that I thought I had gotten rid of years ago. This is just the tray, the main bolts with the provisions to mount the tray aren't part of this part number. I have been told you can use SB widage tray main bolts. The tray has...