Search results for query: *

i had Keith Black Hypereutectic pistons. (this is what Blueprint used in those days) recommended ring gap on a 4" bore was 26thou. apparently many engine builders have experienced the same problem i had in that the top ring would expand under heat and butt , causing the top of the piston to...

i had a "diesel" type noise in my LA Stroker. it didnt just show up one day. it was always there but it got loud enough to notice. could never figure out what it was . long story short i had to dismantle the engine . i found that the cam bearings were wiped out. this was originally a blueprint...

i moved my k member down on my 67 barracuda. had the engine out and wanted extra clearance for dizzy and air cleaner already have offset lower base air cleaner . when i took the bolts down the side near the steering box only dropped enough to put 3 1/8 washers in . this is what i...

any of this stuff left ? still interested

i'm interested in the back up lites, park lites and maybe more . i'm in Saskatoon. let me know what you need for cash on those, and anything else you have priced.

I have had great success with rust check in areas that are not accessable to abrade/clean for a refinish top coat. POR-15 for everything else( within reason).

por -15 makes a floor coating and ,althought I have not tried it ! When i drop some of it on the floor it never goes away! If you`ve had good service out of the rust converter like I have for years, you`ll be inclined to try it! it`s Coincidently the same formula.