Search results for query: *

Still available if you can pay immediately with Paypal.

This is a good used torque shaft (Z bar) for a 70-74 E body or a 71-74 B body with a BIG BLOCK 4 speed. This is the linkage bar that goes from the frame to the bellhousing. The rod from the clutch pedal attaches to one side and the rod to the clutch fork attaches to the other side. This piece...

This is a good used torque shaft (Z bar) for a 67-76 A body with a small block v8. This is the linkage bar that goes from the side of the body to the bellhousing. The rod from the clutch pedal attaches to one side and the rod to the clutch fork attaches to the other side. This piece has been...

sold. Thanks!

It uses the standard 67-76 A body ballstud and inner fender reinforcement bracket. If your car is currently (or was from the factory) a standard transmission vehicle. it will already be on the car. If you are converting from an automatic you will need to weld on the bracket. I have the...

Ok, I'm lowering the price to $100 plus shipping. This is an original Z bar, the special bracket and the spacer from a 67 383 4 speed Barracuda with a 10 1/2 inch bellhousing. ( I took it off myself) I have one of the attaching bolts (standard replacement bolt can be bought at a hardware...

sale pending

I came across this Hurst shifter handle in a box of A body parts. It might be a repro because there's no part number on it. The chrome is above average for a used part. The ball threads are excellent. It looks like some a body shift handles I've had but I currently don't have one to compare it...

I have some factory flexplates both rusty and cleaned & painted ;$5 each for dirty, $10 for painted. here's what you need to know about flexplates: The six cylinder used a different flexplate and the Hemi had an 8 bolt plate. Some of the 67 and down flexplates had a smaller pilot (center...

I have three of the 10 7/8 clutch forks used on 67-69 big block A body, 66-70 big block B body and 70-72 E body with 10 1/2 inch bellhousings. I have one that's blasted and painted for $20 and two that have not been cleaned for $10 each. Note two are pictured, one is not. located in...

This is a box of miscellaneous 4 speed transmission shifter rods and arms that I have collected over 30 years of working on 60's-70's Mopars. It has been a lifesaver when you want to modify something and not screw up an expensive set of new rods. Now that I'm retiring, I need to accept the fact...

Brewers is going to be your best shot for most of it. Brewer's Performance - Mopar A833 4-Speed Transmission and Component Specialists

PRICE REDUCED TO $25 This is a used timing chain cover from a 72 318 340 or 360 LA motor. It will fit virtually all LA motors from 66-the mid 80's although the 60's motors used a cast iron water pump and you would want to change that. From 70 up this part was used on everything. What makes THIS...

This is a used original clutch linkage rod that goes from the clutch pedal to the Z-bar on a 67-76 A body. It is 14 1/4 inches long. This part has been wire wheeled and painted with Cast Blast. It is in good condition. Note: Brewer's transmission has a very nice reproduction of this part if...

PRICE REDUCED TO $25 This is a used clutch fork from a 67-69 A body big block. It measures 10 7/8 overall. It also fits some B and E body applications as well. This part was sandblasted, wire wheeled and painted with Cast Blast and clear coat. It has some minor pitting (pictured) but overall it...

Price now $25

I have one 904 with a sale pending. other than that I have one more 904 and 3 727s

I came across a bunch of (6) neutral safety switch/backup light wiring harnesses. They are all three prong transmission plugs with makes them 69 and up. I'm not certain which fits what but they should include A B and E bodies. located in Savannah, GA I'd like to get $10 each plus shipping or...

I came across a pile of transmission dust covers. Some are small block 727 and some are for small block 904 (they are different). I do NOT have the center plug covers for them. Selling for $10 each plus the ride. Can combine shipping if you want more than one. Located in Savannah, GA. Thanks for...

This is a small block Carter high volume mechanical fuel pump that I got in a box of parts. It appears to be good but I don't have any way to test it so I'm selling it as a rebuildable core. It is possible that it works in which case you would get a pretty good deal. Located in Savannah, GA I'd...

PRICE LOWERED TO $25 This is a used 440 Mopar Performance electronic ignition distributor PN 3690432. It has been sitting on the shop shelf for a few years, but it should still work well. The vacuum pod works correctly (advances when you suck on the rubber hose). Located in Savannah, Ga asking...

Still available

It is what it is but I got the info above from the Google machine: Hurst Chrome Super Shifter Stick 7.5" #7238 Camaro Firebird 1957-1967 Corvette

I was cleaning the garage and I came across these three Hurst 4 speed handles that I did not know I had. The first one (bottom in 1st picture) was marked "67 Cuda" with a magic marker and I got all excited. Unfortunately (unless you are a Chevy guy) when I Googled the part number (6836) it came...

Bill: I sent you a PM. Looks like they are working again

Bill: My inbox only has 2 messages but it says YOUR inbox is full! So I can't send YOU a PM! Perhaps it's a technical issue with the site. If I might ask the moderators to forgive this rule violation and investigate the problem, my email (and Paypal address) is [email protected] and the total is...

This is a used but clean Hurst 6350 4 speed shifter mounting pad for a 67-76 A body. I do not have the bolts but the threads are all good. Located in Savannah, GA I need to get $25 plus the ride. Thanks for looking!

This is a used transmission crossmember for a 67-72 Dodge Plymouth A body 4 speed or automatic. It has been sandblasted and painted with gloss black. Sorry I do not have the bolts or the rubber mount. The mounts are available at Advance for about $5. Located in Savannah, GA, Looking for $65...

This is a used automatic transmission crossmember for a 66-70 Dodge Plymouth B body. It has been sandblasted and painted with gloss black. It has a small dent in the bottom which does not affect the performance or structural integrity of the part (see pics). Sorry I do not have the bolts or the...

Back in the late 70's and early 80's If you were building a 440 for street and strip the Mopar Performance Electronic distributors (PN 3690432) with the chrome or orange boxes were THE way to go! The advance curve was great and the units performed flawlessly. A lot of these are still floating...