Search results for query: *

hopefully a degree might get me a desk job for the second half of life, so I hope so.

Am a bit busy (am taking 18 hours college this semester), but would be happy t omeet up with both members, -fridays and saturdays are the days I can usually take off - I left a message on Ricks70Duster340's member page/front door.

If you are on a strict budget, rustolium makes an enamel that seals rust in a quart can for like $7 that would work great on the interior side or inside a trunk. Enamel is not the best material, but it would last on the inside. i think the enamel is rust brown on the white labeled can

I would fill the holes. If they were small enough, Por-15, or bedliner might close them enough and be good enough. Whatever you think won't eventually rub or wear back to exposed metal which will begin rusting.

you can weld a gas tank, fill it with water though. fumes are what blows up

keep the ground close to the weld spot. never set up a welding circuit across electronics, fuel, or metal attached to flammables such as insulation

grind/clean the spot before you weld. mig weld/tig/stick - with sheet metal the process for sheet metal is about the same. SPOT weld a very short spot. LET IT COOL before returning to that spot. You don't return to that spot 99.999% of the time though. you simply move down a few inches or even...

$25 at the auto parts store

Does anyone have any recommendations for: specific parts, techniques, symptoms to be aware of or potential problems? I can just loosen the door and tighten it again, but that is only going to get me half way there. 73 Plymouth Road Runner (like my avatar) -Thanks FABO!

I can get ahold of some lead epoxy-would it matter at all what color it was if I used it for my initial foundation over the metal?

Is there an epoxy sealer in any of the clear coat paints? I live on the east coast, and if you can believe it, there is salt or some form of alkaline ph in the air here right off the coast that would corrode automotive clear coat (on all of the older local cars) , non- -ferrous alloys, and...

Thank you guys :) Any other input anyone else has is very welcome.

Urethanes Enamels Acrylics Lacquers If I use oil based rustolium as a primer, what can I paint over it? Por 15 and Lizard skin is expensive for us dollar scraping guys! How risky is it to buy used paint or por 15 or other paint related chemicals used from craigslist -or even ebay? Can I mix...