Search results for query: *

bracket needed

on a 1970 a-body the metal tube goes all the way down to AND through the rubber to vent to the outside

the horn relay is behind the drivers kick panel. start there to trace the wire up the column.

Detroit Muscle Tech has the replacement DMT Detroit Muscle Technologies Gaskets AMC Mopar Dodge Plymouth Chrysler Ford Mercury GM Chevy Pontiac Chevrolet or exact item on ebay DMT MOPAR A Body 1966 66 1967 67 1968 69 1969 69 Drip Rail Seal Set Dart Valiant | eBay

pull the knob - 4 pieces, total then the 3/4" flat nut on each post. there should be a bracket on the rear, phillips screw. pull out from rear AFTER disconnecting power, antenna and speaker wires

if you don't have the tool with 2 prongs , then 2 small(mini) screwdrivers and turn the bezel nut. the thin needle nose pliers work also

the 1970-1 standard dash has a one piece radio/heater bezel which is almost square. usually chrome and silver. don't know how you were able to get a 1972 dash bezel in a 1970 dash - screw holes would not line up and shape is different. send photo of what you are working with so I can see. thanks

your quarter glass looks like it is missing the front chrome strip w/weatherstrip. they usually press on and stay on. this goes up and down with the quarter window. this photo is not of my car but you can see the chrome strip

kinda looks like a 71 Dart made to look like a 70 swinger 340

I had to purchase parts car for that dash for my Dart. late production dash with seat belt lite. I have early build dash for sale

with seat belt light or without light?

371774492111 ebay photos of switch

reach under the dash and after pulling it out as far as it comes for lights to come on _ PUSH the button on the bottom of the switch

the Duster, Demon and Dart Sport are 29 models in the dash VIN. you need seats from a 23 coded car. LL23H2R or similar VIN

all 1970-1 rallye dashes have woodgrain on top and black on the bottom

71 Dart/Demon seats. GT package on Dart Legendary should be able to sell covers for a 72 no problem

any info for a Dart headliner??

Need for 72 dart- part number????!!

I need one for a 1972 Dart - this is different from Duster/Demon. what would the part number be?? great work - hope they make one for my car

I posted a dash for sale yesterday view the photo restored 1970 Dart/Duster Rallye DASH Bezel Mopar Interior Parts For Sale

the tire iron goes into the jack before you slide it into the bottom U hole

I need the same things for my concourse restoration of the Canadian swinger special. I have checked parts book and restoration booklets but have not seen anything close. they are plastic chrome pieces and black covers. any help appeciated

still looking for a nice original black cardboard for a 72 dart or scamp. located in CT

that was a normal interchange in the 80's before Legendary interiors showed up to recover seats

1969 dart radios have different mounting places than a 1970. the bottom plate needs a special nut for the right angle bracket and the front of the radio has an extra plate to mount to the dash. the dial has different wording. not a bolt in

I don't think a Demon/Duster headliner is the same as a Dart. If it is an he wants it, I am 2 nd in line as I have a 72 Dart. need black interior INCLUDING seat bealts

top left corner. the screws will exit into wheelwell

NO there was no console available for 1970 having a 4 speed tranny. An automatic was the only way to get a console in a Dart or Duster. Bucket seats were available with either tranny

they hold the defroster tubes to the upper vents in the dash and to the actual heater box. a total of 8 are needed to hold those flexible tubes so they don't move

yes, contact them! Here is a contact from the list Seat covers look good. Thanks for choosing Legendary product. Eric @ Legendary Auto Interiors, Ltd.