Search results for query: *

Use a 9v, make a mark on + or -

Here's how mine turned out from above. Pretty happy with how they turned out. Although I have driven the car yet.

Anyone know where to source one?

I have a 68 notchback barracuda that was built in Aug of 67. Does anyone know what coat hooks were used? I've been looking for a matching one, to the one that came out of the car, but not sure it's even the right one. Anyone know?

Anyone have any insight on this?

Are the rear seat buckle clips supposed to be the same color as the vinyl? If so, how does herbs interior dye hold up to the buckle sliding on and off?

The recaros are going in a 68 notch back. Here's mock up before recovering

I have a set of recaro SE's I just had recovered in factory deluxe style. I even reused the factory seat brackets.

These are not stock in any vehicle that I know of. They are just a true aftermarket seat from the 80-90's. Recaro did have some factory seats in the era in vw's and halo mustang seats. I was fortunate to find a minimally used pair. I'm not generally a fan of aftermarket or modern seats in old...

I just bought and dropped these at the upholstery shop to get redone in the factory vinyl and style. I'm even using factory brackets. Just had to make some mounting tabs. The width was correct but it was about 2" shy on the length.

Bullet connector. Should be able to grab one at any parts store.

Not installed yet, but i would assume so?

Here's where I ended up. Gutted original radio, bent some new side pieces, I had to tack weld the wonder bars and installed an outofsight Bluetooth receiver.

I bought and returned a retrosound also. I was going to do an antiqueauto but they where back ordered for months. Here's where I ended up. Gutted original radio, bent some new side pieces, I had to tack weld the wonder bars and installed an outofsight Bluetooth receiver.

Just a warning, I just returned a Redondo because I couldn't get it to fit a '68 Rallye dash bezel or dash frame. The thumb wheels wouldn't go through the bezel. And as much adjustment as it had, it wasn't enough. Just FYI

Link doesn't work because the thread is 8 years old. And the OP hasn't posted in 4 years. I researched finding these a few months ago but came up empty.

Are you able to send me pics?

Not sure if that was a question? But yes, there.

Here is the best I have right now. Washer pump is hanging but you can see the mounting holes. I can get more if needed

This is the clocking in referring to. "The collar slides on loosely and indexes counter-clockwise into a specific key way cut into the column." It says it's indexed CCW but shows it indexed CW?

I'm using this for the lower. https://www.amazon.com/dp/B00RPFYKPE/?tag=joeychgo-20 And this for the upper. 1962 - 1983 Upper Steering Column Bearing Dodge Chrysler Plymouth - Vans Auto i took mine about apart a long time ago and need to put it back together. But I can't remember if the coller...

Does anyone know if apipco still makes these? I've sent an email and have tried calling numberous times, no answer. Out of stock online. I've found no other sources for purchase. Lmk

Who told you that?

Dumb question... Which way does the dome light and harness install in an Abody 67-69. I have holes on the front and rear side of the center brace. And I've seen it installed both ways. What is the correct orientation? Does the bulb install from the back or front?

Has anyone used #194 leds in their dash? I have the dash out of the car and am going to have it redone. I want to put LED's inplace of the original dash bulbs. Here's the dilema. Original gauges glow green, I want to keep them green. Original bulbs have a yellowish tint, right. Inside...

I have a set of white face gauge covers for a 68 barracuda that I want to install. However my original speedo only goes to 120mph, and the white cover goes to 150mph. What do I have to do to make my gauge accurate? Thanks, Keith

I am going to change the color of my interior from dark green to black on my 68 notchback. I know there are some threads on this, but I can't find them. The search function won't accept 'SEM' or 'DYE' as valid criteria, so thats why I am asking. I bought a qt of 'SEM Vinyl/Plastic Prep' not...

Fastback340, Do you have any pics of the dash lit up? I would really like to see them. By the way, your PM box is full. Keith

These look great. Did you ever get these put on a disk? I have a 68 notchback I would really like to convert to white face gauges. Also, have you had the chance to hook them up? I would be curious to see a pic of the illumination. I think this might be my 1st post! Keith