Search results for query: *

There's a big safety difference between liFePO4 and RC/cell phone lithium ion or lithium polymer batteries.

I'm using the etx1200. I started with a etx900 but upgraded to the 1200. Not because of the battery though. The 900 worked and cranked just fine. But I figured with ECU, CDI, TCM, stereo/sub, etc and most importantly the ford contour fans...I'd want a little more. The contour fans can spike up...

I just bought a Earthx lithium iron phosphate battery. So far it's great. It has a battery management system and is the first liFePo4 battery approved by the FAA. Also just won Indy this year in the Penske car. Also, it only weights 4.9lbs ,is 6.5x6.6x3" and is local. And fits inside a fake...

Like this?

Just a heads up, the ivr3 runs a red LED that flashes when in normal operation condition. You can see it flashing in the dark by your legs/feet. I'm gonna throw a piece of black electrical tape on it. Just a fyi.

Check out MOPAR Products I think a ivr4 may work.

What part number

It's all part of the rear body harness. There is a connector behind the driver side kick panel. The harness runs along the drivers rocker panel, down back by the driverside rear seat and enters a trunk. The dome light connector should be just inside the trunk behind the rear seat on the drivers...

Looks like this.

Couple more pics

I agree it looks like an AMP superseal but mines stubby and has the weird flange face on the end

Stupid phone

I thought it might be a deutsch pin also but can't find one resembling it. It's from an a500 tranny solenoid connector. Maybe Delphi but no luck so far?

Some more

I've come up empty. Anyone have a clue?

You have dims on it?

Sorry, it's aftermarket out of Australia. Here's the kicker! They sell a connector kit with separate pins and connectors, all for 3.50+shipping and lead time. Just being cheap, before I drop $20 on 2¢ of pins, I thought I'd ask if they were easily sourced. I contacted them for a pin make and...

I'm rewiring the whole car with new. The goal is to make all new harnesses with as little connectors, splices, soldering, butt, etc as possible. Just trying to have a clean install. Trying not to hack or butcher things together.

A dozen

Pretty sure they are not metri 150, 280, 480 or 630's.

It's from the microswitch on my Overdrive button. I'm going to install it to control my 42rh. I need to repin the connector to make a OD, TCC and time delay relay harness.

Does anyone know where I can get some of these pins? I can't I'd them, I thought maybe Delphi but can't confirm .Anyone have any ideas?

Thanks. I thought they came out that way but the new ones all came assembled like the bottom one in the pic, backwards.

Do these pull forward from the back of the bucket or push in from the front. Maybe a dumb ? But either way.