Search results for query: *

Thanks I’m bought to do that too guy now. Perfect timing

go tthe 2 of 3 screws that backed out of the motor back in 2 loose screws. Making noise not broken. Those things are expensive

It should hold up pretty well I beat the hell out mine. Like I said before if you find you use it a lot upgrade to the M18 batteries. I used mine to remove the front end and engine on a truck got COVID and 4 weeks later went to put it back together and battery was still good for the whole...

You could have solid white walls in your garage because the art is parked inside of it.

The small compact batteries work great but the 3.0 lasts hours. I usually use a 1/4 adapter

I have the Milwaukee ratchet. It is the best tool I have. I use it all the time. Batteries last a long time.

I had that same tool cart at the airport for my escalator repairs and service. I rolled that thing miles held up great

Depending on use the Kobalt should last a several months. I used a die grinder about 4 hours a day for 4 months and had to replace it. The one I have now has been there about 5 years. With 1 hour use a month. I put a 90 and a long tube coming out of the bottom of the tank to make it easier to...

It’s about 2.5 inches square what is the purpose? Is it just to find the north or South Pole of a magnet and is it worth anything ?

I will be right over, as I am an OSHA Instructor and have vast knowledge of useless information for people with common sense to remove The apparatus from its use where I can take it home and do a thorough safety inspection and bring it up to code. (For Me)

Nice score.

Thanks to the OP. Nice work and thanks for sharing your experiment with us

Here is my favorite. Personal meter.

I have one of those. My father in law gave me. Used it once to try out. Is know in the bottom of the “gifts I can’t give back Box”

I have used meters for 30 years. On low voltage to high 480vac and 12,000DC. The cheap meters are decent for auto motive applications. That is what I keep in my car. 110vac and higher would stay clear of any Thing not catIII rated. Even the Chinese stuff may say CATIII it probably is not. If...

Make sure your work area is well ventilated you don’t want to rob your brain of good oxygen. Have seen it many time, guys welding in their garage and have the door halfway open and welding inside or under the car and pass out and end up spending a couple days in the hospital or dead. Have fun!!!

I have used a camping mat for years now. It’s covered in grease. I’ll roll it and kneel down. Helps my poor worn out knees. I have a lift too......4 jackstands and 2 jacks and 4 of those crappy ramps that slide out from the car when you get halfway on it.

Point is you are safe to use. If direction is wrong follow directions on motor.

You may want to add a reostat to give it a soft start so it doesn’t start up at high speed. What horsepower is the motor

Generator

What kind of motor is it? Used for what? If it is universal you will be ok. If it is 110dc you will need a rectifier. You may have to switch leads depending on what direction you want it to run. Another question, how many wires does it have. 2,3,4. Does the motor have a on/off switch. You may...

Or wrap them in aluminum foil. Redkneck it.

Show OFF! Looks cool. How long did you stand there admiring it. I would of got up in the middle of the night to see it again.

I bought the lamps only and used my current 4foot fixture and cut out the ballast and wired to the 110v. The lamps I bought from light bulb depot. For $22.