Search results for query: *

Wondering if you guys could recommend a front / rear sway bar kit. 440 swap going well. Actually handles Ok but I think bars will help. Used Schumacher /6 to RB kit, .92 torsion bars, XHD Mancini leafs. Which kits do you guys like? Shocks? etc. Thanks

Guess the placement is right. Just looked at old photo of 7 1/4 rear with old tires and springs and wheel placement was similar. Guess I'm just not used to staring at the wheel wells.

Thanks, now that I've looked around on here a little more they do look to have the right placement. I wouldn't mind having spacers made up though. Guess i will also need longer studs pressed into the hangers for those to work? Also, what pinion angle is best? They are XHD springs nd a 440 going...

Ill take pic of side of whole car tomorrow. Let me know if you think rear end is too far forward. Thanks for the replies.. Its an 83/4 out od 66 B body. Think the fit is great other than the tight clearance in the front.

this work?

Trying to upload pics, but the files are too large. Not sure how to make them smaller.

Thanks. I used the larger center hole on the perches and the wheels seem to be slightly too forward. They actually looked better when i pushed the perches to the rear and used the smaller bolt.. only problem is that the hole in the plate (shock absorber plate) didn't line up. can i just drill...

Thanks for the reply... I will use the center hole in the perch. I know there is a left and right hanger, I was trying to figure out which was which when I discovered that no matter how I placed them, the bolt and nut would be off from the stock placement. It's about an inch different. (will...

I just received my offset hangers and shackles today. I can see that a hole will have to be cut in frame rail to recess the nut on the hanger.. Haven't test fitted them in yet, but when I match the studs on the new hangers up to the studs on the old, I noticed that the height of the bolt that...