Search results for query: *

Here's mine

Google, testing a MSD box

Auto or 4 gear?

Runnin TTI's so no help here.

May need angled boots on the wires.

That's a new PCB as evidence of the white silk screening on the new PCB vs the original PCB.

reproductionproducts

88 - 92 rings a bell. Wait for others to chime in.

Did you reinstall the original coil to see if the results are the same?

If you need parts reproductionproducts

back up light question

Check the back up switch w/an ohm meter 1st before you replace it.

I'll check later. As mentioned above, I bought the mopar kit back in early 2000, dizzy, orange ECU and wiring harness.

Got it to come in at 34* with trial and error, had to pull the dizzy a few times. Had to close up the slots more than .165". Still need to tweak the initial. Those sticks in the photo all look the same. Must be the angle.

U guys are awesome!!! Thanks 70Duster440

Thanks all. Can anyone that has the kit measure the 18* stick length?

Circa 2002 – restored the Dart and bought the mopar dizzy kit w/orange ECU and Harness. Mild 360 at the time, didn’t pay too much attention to the timing, ran well, no issues w/performance at that time. Moving ahead 15 years and several mods, latest one comp XE268 hyd flat tappet, comp pro...

Need help wiring in dash reverse indicator light

MSD timing tape. Just clear nail polish the ends. http://www.summitracing.com/parts/msd-8985

Pix might help.

You mean the dash reverse lite next to the ash tray? If so, I tied mine into the wire from the tail lite harness, under the driver's side kick panel. Put it in reverse and probe the harness connector to find the correct wire, should be +12 volts w/the key in run position. .

http://www.msdignition.com/uploadedFiles/MSDIgnitioncom/Products/Ignitions/6420_instructions.pdf

Solder them

www.krusinmoon.com

Had a Mopar resto regulator that did the same thing. Replaced it w/the same, no mo bouncy bouncy needle. The old regulator is in the trunk just in case.

Performance-wise on a stock 360, zip, nada, zilch.

Bling Bling :puke: Wrong Forum too

Please do!!!