Search results for query: *

Yes checked that. I have not taken the gauge out yet and checked with a 9 volt batt.

I need a used fuel gauge to fit a 1974 Duster please.

I mean, how it works day to day now I appreciate your post so much . Keep er Safe.

Thank you. Please send progress report

Cool, where sir ? Thanks !

I need a complete automatic kick down linkage that will work on a 74 Duster with a 904. We are running a 72 318 with a Edelbrock 1406 4 bl. We also need the passenger side outside lock to internal lock mechanism link. If you happen to have the throttle cable we will buy that also. We need it...

This all needs to fit a two barrel carb. Engine is a 318 out of a 72 Challenger that we installed in a 74 Duster. Trans is 904.

24 and a quarter inch I believe. I do not have the old one.

We need the throttle bracket and cable and linkage to a 904 from a 318 two barell out of a 74 Duster.

Thanks ! I am buying some from another member. But, I could use another pair for my son's project.

Thank you for your response. I am working with another member right now, but , would look at pics of your parts if you care to send and give the price. Please pm me , because I don't know how to yet on this phone. Thanks.

This will work for me. Send me a pm please. I can't figure it out on my end.

FABO says I can't just send my info

Tyring to figure out how to pm

Ok What do you need.

I need a fuel gauge , and the left tail light bezel for a 1974 Duster. Thanks.

I need a throttle cable bracket for a 318 two bbl. This is for a 72 318 out of a Challenger that I have installed in a 74 Duster. I'm sure many other years and models would work. Thanks !

I have bought one of these for my 64 Dart ( same cap needed for the 65 ) THEY ARE NICE ! NOS is almost impossible to find, and when you do, expect to pay three times the price. These caps are better than original.

This was info on hotrodreference.com that I pasted. I was wondering about a lot of the inside patterns such as perch placement. Thanks , 72bluNblu for your input. I guess I am back to rebuilding what I have, or, at least trying...having problems with pressing the bearing on to the right spot...

Cool, pm me please !

Thanks Treblig ! AND, here is the info you found : Outside Width Year Model 56.00 1932-1934 All Mopars 55.60 1960-1976 7 1/4 A-body 55.60 1973-1976 8 1/4 A-body 55.60 1966-1972 8 3/4 A-body 55.60 All 8 3/4 A-body 58.54 All 8 1/4 F-body 58.54 All 8 1/4 M-body 58.54 All 8 1/4 J-body...

I need a driver side tail light bezel for 74 Duster, driver condition. Thanks

I am looking to buy a complete 7 1/4 to fit my 1964 Dodge Dart GT. I want one from someone who replaced with a good limited slip, or ?, and rear end was working well without noise when taken out. ( oh, by the way, does anyone know what year models are compatible ? )THANKS, Rick

Hey guys/gals, I need a good running slant six for my sons' 74 Duster around Texas. Thanks

I am happy with your response. I already bought what I need, but may be interested in other parts. My best regards, Rick

Thanks Tony !

A good member of FABO has what I need. Thanks to all... http://www.forabodiesonly.com/mopar/member.php?u=23466

It should be... Thanks !

...must be reasonable, son was forced off road and ended up in ditch. ( or so the story goes ) Anyway, we have a bent lower control arm. This is a low budget car so sound condition only is required. My son will be doing the work with me watching on. PM please, THANKS !

Thanks 64physhy, I did get you PayPal info by private mail, and have been trying to private message you back, but can't get my messaging to work. You stated in your private message for a " Fuel Gauge ". I need a TEMP Gauge please. Will PayPal you ASAP for this item. Thanks, and my best...