Search results for query: *

I have a set of the reproduction trim from Layson's on my car. The price was indeed high, but they look 1000% better than the dented up aluminum pieces. Is the fit and finish perfect, no, but they work great. They are much heavier than the originals, so the trunk lid will fall on your head if...

Craig, you may be better off finding the Formula S emblems new. I got mind for around $28 each. Keep an eye on Ebay, look in the Classic Industries catalog, and such. Keep in mind that you are going to have to re-drill holes and fill others since the Formula S emblems and the base emblems...

I just checked my 1973 340 (now stroker 416)... I saw the 0 on the end through the paint and but it starts with 385 or something like that. This is the number stamped on the passenger side of the motor right under the block plug on a flat. Hard to see with the headers in place. Sorry, but it...

Contact Shumacher Creative Services. They will sell you just the bracket brand new and powder coated without having to buy the whole kit. They don't advertise it, you have to ask for it (and price).

Anybody happen to have one of those steering coupler clamps laying around they are willing to part with? I'm getting tired of trying to bend those little tabs....

Don't forget to look on '70s model truck and vans. I got my rear 11" drums off of a 73 Van.

Be careful, the 1967 Barracuda had a different top tank (the upper tank hose entry is slightly different). I'm not sure if a shroud from a 67 is the same.

You probably need to identify which one you are looking for, the upper or the lower...

The guy who ran over my seat found me another one. Problem solved. Thanks for all who stepped up to help!

PG Classic has brand new reproduction seat belt kits available in mulitiple colors for $375.00 a set. Check them out at www.pgclassic.com

Thanks Donnie. I have found a whole seat on the other side of the state for 160 but that person didn't want to ship either. Was hoping that maybe I can find a track cheaper. Thanks though.

Oh, by the way, if anyone has an old parts book, a part number for that track would be useful.

Yes, the driver side bucket track.. inside piece. The one without the lever. It was a freak thing. Accidents happen. You would think that someone could see a bright white bucket sitting on dark black pavement. It wasn't even where the customer's should be pulling up.

Ok, this is a weird one. Carried my 1968 Barracuda seats in to my local upholsterer to get my new pearl white seat covers installed. I happened to swing in since I hadn’t heard from them in a little while to find out when they sat one of the seats in the sun to soften the vinyl, that my...

Unless there is hidden rust damage to either of those, I would take them to a good bodyman and have them repaired. That doesn't look bad enough for replacement. The fender is hardly dented...

You mean the wheel opening molding?

Just make sure it isn't a "tilt" column

68 and 69 collars are what you want. They are all identical. You will need to pull the steering wheel, remove the snap ring from the bearing, the upper bearing, the shifter mech., etc., The collars swap right over (two of them). Then I ended up cutting off the arm at the bottom of the column...

May I suggest you try to find any 1968/1969 dodge/plymouth that is a floor shift and swap over the upper collars. That way if you can find say a B-body, or C-body column, you may be able to pick that up cheaper than the hard to find/higher price a-body piece. Did that swap myself, came out...

Good deal on that, but that is a fastback seat.

Yeah, I know the cars with rear defroster are already cut on that one side... mine wasn't a defroster car, so both of mine have no holes. If anyone has a pair that the passenger side has the hole, I would be interested in those to. Just let me know what you have. Thanks!!

For those of you who are parting out 67-69 Barracuda Fastbacks---I'm looking for a set of the steel interior side panels that are on the left and right side of the fastback area. Color and condition does not matter (unless they are heavily dented or rusted really bad). I'm planning on cutting...

PG Classics has just released a 1968 Barracuda specific top dash pad to work with the wrap around lower pad. Price $225. Will be ordering mine shortly. Ready to get my dash reinstalled!!

bump - still looking. No one with a race car or a parts car have this A/C bracket still under their dash?

The 68 upper pad will be difficult to find in good condition and reasonably priced. Just Dashes wants around $400 to redo it, and I haven't heard that great of feedback about the quality of the recover. I contacted PG Classics about the upper pad since they do have a quality reproduction '69...

I'm in need of an A/C vent support bracket that will work with my 1968 Barracuda chrome vents. See attached picture. I have been told that the bracket is the same through 1976, but I can not verify this.

Visit your local hardware store. I found that several of them in my area carry the fender bolts w/ washers. Unless you are doing a 100% concours, no one will ever notice the difference.

Well, I found out that 1973 and 1974 A-bodies do not have vent windows so the trim moldings I received are incorrect. I still need the passenger side for a 67-72. They will be smooth and flat on the visible side (no texture like the 73-74). By the way, the 73-74 black set I now have are...

Thanks. I ended up with a pair from another member! Thanks for your reply and I'll let you know if the ones I get have issues.

I'm looking for a passenger side unbroken trim molding- but will buy a pair if you have a set that is in good shape. Found out mine was cracked/broken when I went to collect parts for paint. I'm not concerned on color, but a maroon set would keep me from having to repaint. Let me know what...