Search results for query: *

What’s the Edelbrock fuel filter number?

What engine are you working on?

Jeff Seighman, Just wondering if you’ve worked out the richness issues with your 800 CFM AVS2? What engine are you running that carb on?

Steve, I run an Edelbrock 8724 1/2" thick wood spacer under my 1805 AVS2 as well previously under a 1405 along with a cool carb spacer on my 340. Actually the Cool Carb spacer is right under the carb the 1/2 wood spacer is under that spacer with 3 gaskets all together and it still takes a bit...

I’ve got a AVS2 650 on my 340 and noticed it was really rich too. I leaned it down 1 level. I think all these carbs are calibrated rich out of the box.

I have a friend who put a system on his '69 Rambler with a 401 and he's happy with it. He really likes to have a sleeper/grandma look on his car and it runs in the 11's. They're located in Hamilton Ontario which is pretty close to me.

Actually, that was the first thing I did. Remove that ugly plate.

I have the 1905 AVS2 manual choke and I faked the factory choke system for the “correct” look. I tapped the holes on the AV2 2 carb body where the pull-off would mount and installed an NOS pull off in the factory location. I also ran a dummy vacuum hose from the pull off to the plug in the base...

A recent episode of Engine Masters on Motortrend On Demand proved there was a change in air/fuel ratio at idle when a spacer was installed under a carb on a dual plane intake. The idle air/fuel ratio had to be adjusted, but the fuel distribution at higher RPM was more even, If I remember...

Eddy.... Van Halen?

1969 parts book says it's part number 2825417, hose length as required A quick google search says it's 5/8 I.D.

If you're in Canada, these guys offer free shipping. I'm showing a price on a '69 Dart gas tank. Spectra CR11C Canada

Steve, Check out Princess Auto if you have one in your area. I bought Carb Cleaner in aerosol cans on sale for $3.00 a can.

I am running the Mopar Performance aluminum copy of the factory '68/'69 cast iron intake part number P4529116. Painted engine colour it looks like the stock cast iron but weighs like 25 lbs less. Here is a link to my Dragtimes page with pictures of my mostly stock 340 engine with 3.23 gears...

K&N E-1540 - 3.5 inches high K&N E-1530 - 2.75 inches high I've been using the E-1540 on my '69 Dart 340 with factory air cleaner for about 5 years with no clearance issues with the hood.

Use the stock 340 air breather but use the ‘68 383 K&N air filter element instead. It‘s the same diameter as the 340 one but 3/4 of an inch taller opening the gap more between the aircleaner base and top for more air entry.

I totally agree. The Spectra sender indicates empty but I actually still have 2 gallons in the tank. When I fill the tank just over halfway the gauge indicates full and then the gauge drops like a sack of hammers after a short drive. Thought I had a rupture in the tank when I added gas the...