Search results for query: *

Or 12..

Sounds pretty awesome! Shifts pretty good too. I’ll keep a eye out for you on 93.

I thought it would be cool to put in my early ‘68 Barracuda which would have had that shifter handle from the factory but I’ve got a console and a NOS Hurst console shifter handle in there now. So forget it…

Great thread Wayne! Mine sure does look like a non-console shifter handle compared to the bends on your console handle.

Hello Fellow FABO’ers, A friend asked me to help identify a shifter he’s had in garage for many years. I’m not that versed on Inland shifters. Can anyone please tell me if this is a four speed shifter and if it’s for a console or non console car? It looks like it doesn’t have the correct...

Mine took just over 4 bottles of MT-90 if I remember correctly. Buy 5 just to be sure.

Redline MT-90 in mine. Synthetic 75W90 GL4 rated. Shifts amazing.

My advice is to convert to 4 speed but keep all the automatic stuff in case you want to convert back to automatic. I converted my Dart to 4 speed and then back to automatic for the HOTROD Power Tour where there are hours of stop and go driving. It's an easy swap back to automatic. Clutch pedal...

I'm certainly no shifter handle expert, but that looks like an F body shifter handle to me.

When I converted my 340 from auto to manual I measured the pilot hole in my crank and it didn't measure up to any available pilot bushing outer diameters, so I used the plug with the needle bearing that fits in the torque converter register hole in the crank instead. Last winter I decided to go...

Can anyone confirm the a833 4 speed oil drain plug NPT size? THANKS!

If you are off a bit it's not a huge deal, the shifter boot will allow for some mis-alignment. I had the hump and cross member cut out of a car in one piece so I was able to position the hump using the cross member/rear trans mount as a reference.

I found these articles really helpful for the conversion, especially the first one. http://www.moparmusclemagazine.com/techarticles/drivetrain/mopp_0107_727_torqueflite_transmission_conversion/...

Feel free to P.M. me if you have any questions.

Hi, I just did a 4 speed conversion on my '69 Dart. I found just about everything I needed from Mega Parts USA. Here is a link to a reproduction ball stud bracket if you can't find an original. http://www.megapartsusa.com/proddetail.asp?prod=143%2DFB676 There should be a rubber plug...