Search results for query: *

There is a 1" hole and 2 screw holes above the seam over the water valve in the fire wall.Whats supposed to go there?

A haaa Three coming thru the firewall. I guess I'll just T off one of the diaphragms that's activated at the same time thanks all Jim

Thanks 273 you posted a couple of wiring diagrams for 73+71 darts that helped a lot. I've got 3 vacuum hose sets all the same. Going thru some old posts some water valves were spring loaded.That would solve everything.

Reinstalling air in my 71 swinger basket case. Got the electrical worked out,now on to vacuum. I think I've got all the vacuum lines on right, except the water valve. The little grommet going thru the fire wall has 2 holes in it. One for the vacuum with no stripe, the vacuum supply, The other...

Thanks 273 appreciate the response I see one more wire that needs power so I'll check it to see if its hot. I copied so many diagrams off the internet but it looks like i only need these 2 and the vacuum diagram . It could be the off button may be junk too . thanks for the help Jim

I'm putting a heat AC unit back in a 71 swinger . It also has a 73 dash so some of the connectors are a little different. I spliced a couple of newer connectors on .The color code looked the same.I ran the hot to the black wire in the 3 spd switch and the green wire on the blower motor to the...

All the wires are AC heater and blower motor resistor related. same number of wires,8, same colors just the shape of the plug is different. One plug is the 2 speed blower motor switch The other is the push button vacuum controller plug

I'm switching from a 71 dart dash to a 73 dart dash in my 71 swinger. The plugs are different between those years for the heater and AC between the harness and heater-AC controller, but the color code is the same. Is it safe to splice a plug onto the wire harness ,keeping the color code the...

Thanks jbc how did it cool and did you use a stock evaporator? jim

http://docs.lib.purdue.edu/cgi/viewcontent.cgi?article=1640&context=iracc

I don't know enough about AC but it seems to most of the heat transfer happens at the condenser . I can only find comparisons between serpentine and parallel condensers not evaps I'll just keep looking . Maybe I'll take your advice Clean it up and put it back. Thanks for the info Jim

thanks for the reply 273 I went to ebay and found they make parallel and serpentine evaporators just like condensers . A parallel condenser is supposed to be 30% cooler( don't know I just read it) does that hold true for the evaporators? Am I wasting my time looking for a parallel...

I'm putting back an AC system in my 71 dart . I'll be putting in a sanden type compressor and a parallel flow condenser. Is the stock evaporator good enough or the newer ones much better? small tubes more fins? Thanks Jim